Advertisement
XV-N40BK,XV-N44SL
3.1 Test mode setting method
(1) Unplug the power plug.
(2) Insert power plug into outlet while pressing both "PLAY" key and "STOP" key of the main body.
(3) The FL display shows " 0", and the main body turns to test mode. " " means the destination, and "0" means parameter adjust-
ment status.
(4) To release test mode, press "POWER" key of the main body.
NOTE:
Each pressing of "CHOICE" key of the remote controller in test mode changes the mode as follows.
3.2 Method of displaying version of firmware
(1) Set the main body at test mode.
(2) Press "CHOICE" key of the remote controller once. Then, version number and alphabetical letter of the system controller and
the back end are displayed in the FL display as follows:
3.3 Initialization method
Please initialize according to the following procedures in the following case:
• Just after you upgrade the firmware.
• After you confirm the symptoms that a customer points out. First Initialize, and then confirm whether the symptoms are improved or
not.
• After servicing, before returning the main body to a customer. (Initialized main body should be returned to a customer.)
(1) Set the main body at test mode.
(2) Press "PAUSE" key of the main body.
(3) When initialization is completed, the FL display changes from " 0" to " 00".
(The left "0" of "00" is not always "0". It shows parameter adjustment status.)
STANDBY/ON
OPEN/
CLOSE
DISPLAY
1
2
3
4
5
6
7
9
8
10
0
+10
TITLE/
RETURN
GROUP
CANCEL
ENTER
PREVIOUS
NEXT
CLEAR
SELECT
SLOW-
SLOW+
3D
PHONIC
REPEAT
VFP
PROGRESSIVE
SCAN
ANGLE
SUB TITLE
AUDIO
ZOOM
DIMMER
1-14 (No.A0040)
0 ------------------------------
_
FL Display becames all lighting
CK --------------------------------
EP
-------------------------------
FL Display (Example)
POWER key
CHOICE key
(switch of mode)
SECTION 3
Adjustment
Becames test mode
----------------------
Version of firmware
Check mode
Not used
19_16
Back end
System controller
FL Display
PLAY key
(for test mode)
STOP key
(for test mode)
PAUSE key
(for initialize)
Advertisement
