2.2.2 Removing the traverse mechanism assembly (See Figure 7)
Reverse the loading mechanism assembly. Remove the four
screws B attaching the traverse mechanism assembly. Remove
the traverse mechanism assembly upward.
2.2.3 Removing the elevator (See Figure 8 and Figure 9)
• Prior to the following procedure, remove the traverse mecha-
nism assembly.
(1) Remove the two arms of the elevator from the two parts f
by moving the arms in a direction of the arrow.
(2) Pull out the elevator in a rear direction.
Attaching the elevator:
Engage the two holes g to the two shafts on the front part of
the elevator. And then, attach the elevator.
Loading mechanism
B
assembly
Traverse mechanism
B
assembly
Fig.7
Part f
Fig.8
Elevator
Shaft
Shaft
Shaft
Fig.9
XV-N40BK,XV-N44SL
B
B
Elevator
Part f
g
Slide cam
g
(No.A0040)1-11