Page 3
Using any parts other than genuine Toastmaster factory supplied parts relieves the manufacturer of all liability. NOTICE Toastmaster (Manufacturer) reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, Improvements, additions or replacements for previously purchased equipment.
A Location and Function of Controls B Operating Procedure C Operating Hints and Cautions D Operating Capacity E Cleaning SECTION 4 PARTS LIST Model 1D3 & 1 D2-2 Exploded Drawing 14-15 Model 1D22B& 1D3B Exploded Drawing 16-17 Model 1BB5 Exploded Drawing 18-19 SECTION 5...
Page 5
Toastmaster Model 1D3, 1D22B and 1BB5 Toasters are: • Equipped with heating elements to provide uniform heat for even toasting. • Automatic pop-up type toasters • Equipped with an operating lever, color selection knob and manual release lever for each pair of toaster slots.
SECTION 1 - DESCRIPTION A. Component Location Data Plate Located At Slots - Model 1D3 Has A Heating Rear Of Toasters Element on Both Sides of Each Slot. 36 " Cord & Plug Operating Controls (See Operation Section 3) Slots - Model 1 BBS...
B. Component Function 1. Slots a. Model 1D3 Toaster has four slots for toasting one to four slices of bread. The width of the toasting slots will accommodate "Texas Size" bread, frozen waffles, English muffins and many other food items. A heating element is located on both sides of each slot for a total of 8 elements.
SECTION 1 - DESCRIPTION NOTICE Toastmaster (Manufacturer) reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improve- C. Toaster Specifications: ments, additions or replacements for previously purchased equipment.
Page 9
SECTION 1 - DESCRIPTION D. Model 1D3 and 1D22B Toaster Dimension Drawings 1D3 and/or 1D22B mounted on 1D3CS Stand 1D22B Top View View 1D3 or 1D22B Front View 1D3 or 1D22B Side View 1D3 and/or 1D22B Dimension Drawings...
Page 10
SECTION 1 - DESCRIPTION D (continued). Model 1BB5 Toaster Dimension Drawing Top View Front View Side View 1BB5 Dimension Drawing...
The freight carrier has assumed responsibility for its safe transit and delivery. If equipment is received in All 1D3, 1BB5 and 1D22B toasters are factory damaged condition, either apparent or concealed, a equipped with cord and plug. Do not change cord claim must be made with the delivering carrier.
Figure 3-1 Operation Controls (Model 1D3 shown. Models 1 BBS and 1 D22B operation control are basically the same as the Model 1 D3) 1. Operating Lever Lowering the operating lever lowers the bread into the toasting chambers. When the toast has reached its set darkness the operating lever and the toast will automatically be raised.
SECTION 3 - OPERATION Operation Procedure 1. Insert bread into toaster slots. IMPORTANT: On Model 1D22B bun toasters the buns must be inserted so the side to be toasted faces the heating elements. The heating elements are located as shown in Figure 3-2. 2.
CAUTION! Always disconnect electrical power or unplug toaster before cleaning or performing any service. 6. Service Service MUST BE performed only by an authorized Toastmaster Service Agent. D. Operation Capacity The Model 1D3 will toast up to 250 slices/hour. The Model 1BB5 will toast up to 125 slices/hour.
DESCRIPTION K1DS136 MACHINE SCREW, #10-32 x 1/4", TRUSS HEAD K1DC42 CASE TOP K1D85A CASE ASSEMBLY, COMPLETE K1DC10 FRONT CASE BINDER K1DC11 REAR CASE BINDER K1 DS201 RIVET, 0.141x1/4" 2400075 TOASTMASTER NAME PLATE 1B6S61 MACHINE SCREW, #8-32 x 1/4", TRUSS HEAD...
Page 16
SECTION 4 - PARTS LIST K1DC32 TERMINAL BOX COVER K1DC39 TERMINAL BOX 1DS6 MACHINE SCREW, #8-32 x 1/4", ROUND HEAD 3882D8735 1/2" CABLE CONNECTOR 1D3S5 CORD & PLUG, 250V (CURRENT) 1D3S4 CORD & PLUG, 125V/250V (4 WIRE, NON -CURRENT) 3001059 CORD &...
Page 17
K1DS136 MACHINE SCREW, #10-32 x 1/4", TRUSS HEAD K1DC34 CASE TOP, BUN K1D85A CASE ASSEMBLY, COMPLETE K1DC10 FRONT CASE BINDER K1DC11 REAR CASE BINDER K1DS201 RIVET, 0.141 x 1/4" 2400075 TOASTMASTER NAMEPLATE 1B6S61 MACHINE SCREW, #8-32 x 1/4", TRUSS HEAD...
Heating Elements Heat Switch Heat Switch Non-Current 1 20/208V, 115/230V and 120/240V 3 Pole, 4 Wire Cord w/NEMA 14-20P Plug used Neutral with 14-20R Receptacle, #14-4 AWG at least 90°C (194°F) Heating Elements Heat Switch Heat Switch Model 1D3 Schematics...
SECTION 5 - SCHEMATICS Non-Current 120/208V, 115/230V and 120/240V 3 Pole, 4 Wire Cord w/NEMA 14-20P Plug used with 14-20R Receptacle, #14-4 AWG at least 90°C (194°F) Neutral Current 120V 2 Pole, 3 Wire Cord w/NEMA 5-20P Plug used with 5-20R Receptacle, #14-3 Neutral AWG at least 90°C (194°F) Heating...
SECTION 5 - SCHEMATICS Current 120V 2 Pole, 3 Wire Cord w/NEMA 5-15P Plug used with 5-15R Receptacle, #16-3 AWG at least 90°C (194°F) Heating Elements Heat Switch Non-Current 208V and 240V 2 Pole, 3 Wire Cord w/NEMA 6-15P Plug used with 6-15R Receptacle, #16-3 AWG at least 90°C (194°F) Heating...