Brake Warning Light; Master Warning Light; Automatic Transaxle - Mazda CX-3 Smart Start Manual

Hide thumbs Also See for CX-3:
Table of Contents

Advertisement

Brake Warning Light

Parking brake on/low brake
fluid/malfunction

Master Warning Light

Low Fuel Level
Low Engine Oil Pressure
Power Steering Malfunction

Automatic Transaxle

Warning Light
Charging System Malfunction
Door/Trunk/Tailgate Ajar
Low Washer Fluid Level
Warning Light
KEY Warning Light
KEY Indicator Light
Check Fuel Cap
Perform Maintenance
NOTE:
See Owner's Manual for
more details and explanations.
• Rotate the knob to adjust the brightness of the
1
instrument cluster and other dashboard illuminations.
• Push to toggle between trip meter (A & B).
2
• When a trip meter is selected, push and hold to
reset to zero.
• Push the knob for 1.5 seconds or more to change
3
the speed units between km/h and mph.
DASHBOARD
ILLUMINATION/
DIMMER
/
1
TRIP METER
2
ENGINE COOLANT TEMP LIGHTS
Since this vehicle does not use an engine
coolant temperature gauge, red and blue
engine coolant temperature lights are used to
indicate high and low coolant temperature.
Red Coolant Temp Light
Flashing: Engine is starting to run hot.
Drive slowly to reduce engine load.
On: Engine is overheating. Safely pull
over to the side of the road and turn
the engine off. Refer to the Owner's
Manual for more information.
Blue Coolant Temp Light
On: Engine coolant is cold and no warm
air is available for heater/defroster.
RED
Off: Engine coolant is warm and warm air
GREEN
is available for heater/defroster. The light
may stay on for a few minutes after start-
up when the engine is cold, but the vehicle
can be driven with the light on or off.
NOTE:
setting is set on "auto", the instrument
cluster and display may become dimmer
when the headlights are on. If the display
and instrument cluster become too dim or
too bright when the headlights are on, simply
rotate the dimmer knob located on your
instrument cluster to adjust the brightness.
www.MazdaUSA.com
TRIP COMPUTER
The following information
can be selected by pushing
the
or
of the INFO
button on the steering wheel.
• Approximate distance you
can travel on the available
fuel (RANGE)
• Average fuel economy
• Current fuel economy
• Average vehicle speed
• To reset, push and hold
the INFO button for more
than 1.5 seconds.
When your Mazda Connect display
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents