Page 1
Garmin fleet 670/670V ™ Owner’s Manual July 2015 Printed in Taiwan 190-01792-00_0B...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Viewing Trip Data from the Map ..........6 Support and Updates ..............1 Viewing the Trip Information Page ......... 6 Setting Up Garmin Express ........... 1 Viewing the Trip Log .............. 6 Entering and Exiting Sleep Mode ..........1 Resetting Trip Information ............6 Turning Off the Device ..............
Page 4
Deleting a Paired Phone ............11 Removing the Device from the Mount ........16 Placing a Call ................11 Removing the Mount from the Suction Cup ......16 Dialing a Number ..............11 Removing the Suction Cup from the Windshield ....16 Calling a Contact in Your Phone Book ........
Support and Updates based on configuration by your fleet management company. Garmin Express provides easy access to these services for ™ Garmin devices. Some services may not be available for your device. • Product registration • Product manuals • Software updates •...
Adding Shortcuts and Widgets to the Home Screen Finding Trucking Points of Interest You can add application shortcuts and widgets to any of the The detailed maps loaded in your device contain trucking points home screen pages. Widgets are tools that provide quick access of interest, such as truck stops, rest areas, and weigh stations.
Finding an Address Saving Locations NOTE: The order of the steps may change depending on the Saving a Location map data loaded on your device. Search for a location (Finding a Location by Category, Select Where To?. page If necessary, select Searching near: to change the search From the search results, select a location.
Custom POIs are customized points on the map. They can signs and to use safe driving judgment at all times. Garmin will contain alerts that let you know if you are near a designated not be responsible for any traffic fines or citations you receive for point or if you are traveling faster than a specified speed.
Adding a Point to a Route Choosing a Transportation Mode Before you can add a point, you must be navigating a route. Swipe up from the bottom of the screen. From the map, select > Where To?. Select Search for a location. Warning Icons Select a location.
Resetting Trip Information Banks and ATMs From the map, select Speed. Weigh stations Select > Reset Field(s). Select an option: Finding Upcoming Points of Interest From the map, select > Up Ahead. • When not navigating a route, select Select All to reset every data field except the speedometer, on the first page.
Disabling a Custom Avoidance Traffic You can disable a custom avoidance without deleting it. Select Settings > Navigation > Custom Avoidances. NOTICE Garmin is not responsible for the accuracy or timeliness of the Select an avoidance. traffic information. Select > Disable.
• To record the amount in gallons, select Liters > Gallons > You can purchase additional subscriptions or a renewal if your Save. subscription expires. Go to http://www.garmin.com/traffic. If necessary, select the Tax Included check box. Subscription Activation Select the gas station where you refueled.
Managing Driver Information Connect the device to your computer. Select > Hours of Service. Open the "Garmin" drive or volume, and open the Reports Select a driver. folder. Select Driver Info. Open the IFTA folder. Select an option: Open the .csv file.
Disabling Voice Command Select an option: You can disable voice command, which prevents you from • To view the logs on your device, open the "Garmin" drive accidentally activating voice command while speaking. or volume, and open the Reports folder.
The Bluetooth device can Select > Device > > Set Home Number. still connect to your Garmin fleet device automatically in the Enter your phone number. future. Select Done. Select Settings > Bluetooth.
Viewing ecoChallenge Scores Planning a Trip Select > ecoRoute™ > ecoChallenge. You can use the trip planner to create and save a trip with multiple destinations. About the ecoChallenge Score Acceleration: Displays your score for smooth and gradual Select > Trip Planner. acceleration.
You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software • Select RV to add an RV profile. (www.garmin.com). In addition to map and data storage, the Select memory card can be used to store files such as maps, images, If necessary, select Units to change the units of geocaches, routes, waypoints, and custom POIs.
GPS Simulator: Stops the device from receiving a GPS signal, Proximity Alerts Settings and saves battery power. NOTE: You must have custom points of interest (POIs) loaded Calculation Mode Settings for proximity points alerts to display. Select Settings > Navigation > Calculation Mode. Select Settings >...
Garmin dealer or www.garmin.com. Connecting a Backup Camera Device Care NOTE: This feature is available only for the Garmin fleet 670V model. NOTICE On supported models, the device mount includes a 3.5 mm Avoid dropping your device.
My device does not appear as a removable Purchasing Additional Maps drive on my computer Go to your device product page at (www.garmin.com). On most Windows computers, the device connects using Media Click the Maps tab. Transfer Protocol (MTP). In MTP mode, the device appears as a portable device and not as a removable drive.
Need help?
Do you have a question about the fleet 670V and is the answer not in the manual?
Questions and answers