Download Print this page

Black & Decker BDCCS18 Original Instructions Manual

Hide thumbs

Advertisement

Quick Links

BDCCS18
www.blackanddecker.co.uk

Advertisement

loading

  Also See for Black & Decker BDCCS18

  Related Manuals for Black & Decker BDCCS18

  Summary of Contents for Black & Decker BDCCS18

  • Page 1 BDCCS18 www.blackanddecker.co.uk...
  • Page 4 ENGLISH (Original instructions) 20 21...
  • Page 5: Intended Use

    3. Personal safety a. Stay alert, watch what you are doing and use common Your BLACK+DECKER BDCCS18 Circular saw has been sense when operating a power tool. Do not use a designed for sawing wood and wood products. This tool is power tool while you are tired or under the influence intended for professional and private, non professional users.
  • Page 6: Cutting Procedures

    ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or g. Always use blades with correct size and shape binding of moving parts, breakage of parts and any (diamond versus round) of arbour holes. Blades that other condition that may affect the power tools do not match the mounting hardware of the saw will run operation.
  • Page 7: Lower Guard Function

    (Original instructions) ENGLISH Saw blades f. Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade Do not use blades of larger or smaller diameter than adjustment shifts while cutting, it may cause binding and recommended.
  • Page 8 ENGLISH (Original instructions) Loosen the depth adjustment knob (6) to unlock the If the supply cord is damaged, it must be replaced by the saw shoe (5) as shown in figure F. manufacturer or an authorised BLACK+DECKER Service Move the saw shoe into the desired position. The Centre in order to avoid a hazard.
  • Page 9: Blade Selection

    (Original instructions) ENGLISH Lower Blade Guard Switch WARNING: Laceration Hazard. The lower blade guard is Saw is equipped with a switch lock-off feature to prevent a safety feature which reduces the risk of serious personal unintentional operation. injury. Never use the saw if the lower guard is missing, dam- To operate the tool, press in on the lock-off button (2) from aged, misassembled or not working properly.
  • Page 10: Troubleshooting

    ENGLISH (Original instructions) Mains plug replacement (U.K. & Ireland only) Remove hand from guard lever and firmly grip secondary handle (7), as shown in figure N. Position your body and If a new mains plug needs to be fitted: arm to allow you to resist kickback if it occurs. Safely dispose of the old plug.
  • Page 11: Ec Declaration Of Conformity

    Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised BDCCS18 Circular saw Black & Decker repair agents and full details of our after- sales service and contacts are available on the Internet at: www.2helpU.com...
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...