Advertisement
Get started
The headset contains the
following parts shown on the title
page: earpiece (1), indicator light
(2), volume keys (3), multifunction
key (4), earloop holder (5), earloop
(6), microphone (7), and charging
contacts (8).
Before using the headset, you
must charge the battery and pair
the headset with a compatible
device.
Compatible chargers
This device is intended for use
when supplied with power from the
following chargers: AC-6 and DC-6.
The exact charger model number
may vary depending on the type of
plug. The plug variant is identified
by one of the following: E, EB, X,
AR, U, A, C, or UB.
4
© 2010 Nokia. All rights reserved.
Charge the battery
1. Connect the charger to a wall
outlet.
2. To charge the headset in the
desk stand (if provided with the
headset), connect the charger
cable to the charger connector
at the side of the desk stand
(9), and place the lower end of
the headset into the slot on the
desk stand (10). The headset
switches off.
To charge the headset using the
charger adapter (if provided
with the headset), connect the
charger cable to the charger
connector on the adapter (11),
and insert the lower end of the
headset into the adapter (12).
The headset switches off. To
keep the adapter attached to
Advertisement
