Nokia BH-806 Manual
Hide thumbs Also See for BH-806:

Advertisement

Nokia J (BH-806)
Issue 2.0

Advertisement

Table of Contents
loading

Summary of Contents for Nokia BH-806

  • Page 1 Nokia J (BH-806) Issue 2.0...
  • Page 2 Introduction About your headset With the Nokia J headset, you can handle calls hands-free, even when you are using two mobile devices at the same time. Note: The surface of this product does not contain nickel in the platings. The surface of this device contains stainless steel.
  • Page 3: Get Started

    This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device. Get started Keys and parts Indicator light Multifunction key Earpiece...
  • Page 4 Charge the battery Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard.
  • Page 5: Switch Off

    When you unplug a charger, hold and pull the plug, not the cord. The fully charged battery has power for up to 5 hours of talk time and up to 100 hours of standby time. If you keep the headset in the carrying clip, the standby time is up to 3 months.
  • Page 6: Make Calls

    Pairing mode is activated, and a blue indicator light starts to flash quickly. Follow the voice prompts. Within 3 minutes, activate Bluetooth on the device, and set it to search for Bluetooth devices. For details, see the user guide of the device. Select the headset from the list of found devices.
  • Page 7 Switch a call between your headset and mobile device Touch and hold for 2 seconds. You can redial the last called number or use voice dialling, if your mobile device supports these features with the headset. Redial the last called number When no call is in progress, press Use voice dialling When no call is in progress, press and hold...
  • Page 8: Product And Safety Information

    End an ongoing call, and activate a held call Touch If you redial or use voice dialling, the call is made on the device you last had an active call on with the headset. Settings Deactivate voice prompts Get verbal feedback and instructions, for example, when pairing your device. Make sure the headset is switched on, and touch and hold for 9 seconds.
  • Page 9 Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Check product environmental information and how to recycle your Nokia products at www.nokia.com/werecycle, or with a mobile device, nokia.mobi/werecycle.
  • Page 10: Copyright And Other Notices

    Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

This manual is also suitable for:

J

Table of Contents