Buick 2015 Regal Owner's Manual page 215

9-38 Driving and Operating
happens, the cruise control will
automatically disengage. See
Traction Control/Electronic Stability
Control on page 9-34. If a collision
alert occurs when cruise control is
activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System on page 9-51.
When road conditions allow you to
safely use it again, the cruise
control can be turned back on.
If the brakes are applied, the cruise
control disengages.
(On/Off): Press to turn cruise
control on or off. A white indicator
comes on in the instrument cluster
when cruise is turned on.
RES+ (Resume/Accelerate): If
there is a set speed in memory,
press the control up briefly to
resume to that speed or hold
upwards to accelerate. If cruise
control is already active, use to
increase vehicle speed.
SET (Set/Coast): Press the
control down briefly to set the speed
and activate cruise control. If cruise
control is already active, use to
decrease vehicle speed.
(Cancel): Press to disengage
cruise control without erasing the
selected set speed.
Setting Cruise Control
If is on when not in use, SET or
RES+ could get bumped and go into
cruise when not desired. Keep
off when cruise is not being used.
I n f o r ma t i o n P r o v i d e d b y :
1. Press the button to turn the
cruise system on.
2. Get up to the speed desired.
3. Press and release the SET
control on the steering wheel.
The desired set speed briefly
appears in the instrument panel
cluster.
4. Remove foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster (Uplevel Cluster) on
page 5-12 or Instrument Cluster
(Base Level Cluster) on page 5-8.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or the is pressed, the
cruise control is disengaged without
erasing the set speed from memory.