Mitsubishi MR-WX743Y Operating Instructions Manual page 36

Troubleshooting Troubleshooting
Problem
Food in the versa Food in the versa
compartment compartment
melts melts
Soft-Freezing Soft-Freezing
freezes food too freezes food too
hard hard
Cannot make ice Cannot make ice
Water in the tank Water in the tank
stays at the stays at the
same level same level
Water tank Water tank
or water supply or water supply
pipe freezes pipe freezes
Ice is small or Ice is small or
joined together joined together
36
Check
1 When storing ice cream and frozen
1
foods, did you set the refrigerator to
"FRZ•H"?
2 Did you set
2
Hot freezing
after placing hot food inside?
3 Is the versa compartment set to Power
3
Save Mode?
4 When placing hot food in the
3
compartment, did you place it away
from other food?
5 Is food piled up in the upper area?
5
6
Has enough time passed after
6
installation?
1 Is the versa compartment set to "FRZ"? Set the versa compartment to "SOFT FRZ".
1
2 Does the food contain a lot of
2
moisture?
3 Is food freezing the same way as with
3
"Freezing"?
1
Has enough time passed after
1
installation?
2 Has food, the ice server, or another
2
object been left in the ice storage box?
3
Is the ice making setting for the ice
2
making compartment set to "ICE STOP"?
4 Are the ice tray and ice tray lock lever
4
installed correctly?
5
Is the water supply pipe installed
5
correctly in the tank holder area?
6 Are the water supply pump and tank
6
pipe installed correctly onto the water
tank?
7 Is the ice making compartment set to
7
Power Save Mode?
1 Are the water supply pipe and water
1
tank installed to the refrigerator without
any gaps?
Additionally, is the tank pipe installed
to the water tank without any internal
gaps?
1 Has ice been stored inside the ice
1
storage box for a long time?
2 Is the ice making compartment set to
2
Power Save Mode?
(Continued) (Continued)
Explanation and Action
"SOFT FRZ", "FRZ•L", and "FRZ•M" are higher
temperature settings. Set to "FRZ•H".
When placing hot food in the compartment, use
Hot freezing.
Cancel Power Save Mode.
Frozen food may thaw if it makes contact with hot food.
Leave space.
Leave a gap so that cold air can fl ow to the ceiling and
between food.
The refrigerator takes time to cool completely.
Foods containing a considerable amount of moisture may
freeze too hard. We recommend leaving the food for about 5
to 15 minutes, placing the other hand on the back of a knife,
and cutting the food by pushing on it. Also, use the setting
"SOFT FRZ•L".
Food appears to freeze in the same way as with "Freezing".
It takes 4 to 5 hours for the refrigerator to cool, and
24 hours or more in summer to make ice.
Remove food or other objects from the ice storage box. The
ice storage box is judged to be full of ice. Also, spread the
ice out fl at all the way to the front.
Set the ice making compartment's setting to
Set the ice tray lock lever to the correct position and check
the installation status of the ice tray.
Remove any foreign objects creating gaps and install the
pipe so that it is not loose.
Check that they are correctly installed. In particular, ensure
that the opening of the tank pipe inside the tank is installed
fi rmly to the tank.
Cancel Power Save Mode.
Check the installation around the water tank. If there are
gaps, the cold air may escape and water may freeze.
Ice stored inside the ice storage box for a long time may
shrink or join together (due to a phenomenon called
sublimation).
When not using ice, it is recommended that you remove the
water and stop the ice making.
Cancel Power Save Mode.
Pages 21 - 22
Page 15
Page 24
Pages 21 - 22
.
Pages 21 - 22
Page 27
Page 27
Pages 26 - 27
Page 24
Pages 26 - 27
Page 24