Mitsubishi MR-WX743Y Operating Instructions Manual page 29

When attaching parts, use the backward procedures of removal.
Glass Shelf (Upper) (Middle) (Lower)
1 Lift the front of the shelf using both hands.
2 Pull out to the front.
1
3 Using the gap between the refrigerator compartment
and door, rotate the glass shelf (upper) and remove
from the refrigerator.
* The illustration is of the glass shelf (upper). Remove the
glass shelves (middle) and (lower) in the same manner.
* Remove the glass shelf (lower), with the partition
attached, after you have removed the glass shelf
(middle) and slide glass shelf.
Partition
1 Remove the glass shelf (lower) and place it on
a surface such as a stand.
2 Press the glass shelf (lower) down with one
hand.
* The shelves are fi rmly installed.
3 Pull in the direction indicated by the arrow.
Lower Case
1 Fully pull out the lower case.
2 Lift the lower case out to the front.
2
wer) and place it on
down with one
alled.
d by the arrow.
2
3
2
1
Be careful when attaching and
removing the glass shelf.
If it is attached improperly, it could
Follow the
come loose and fall, causing injury.
instructions
Slide Glass Shelf (Front) (Back)
1 Remove the slide glass shelf (front) using the
protruding parts in the front and back along with the
grooved parts.
Protruding Part
Grooved Part
2 Pull the slide glass shelf (back) out to the front
while holding the front with both hands.
2
Upper Case /
Upper Case Cover
1 Lift the upper case cover.
2 Press the position indicated with
remove.
1
3 Fully pull out the upper case and lift the front of the
upper case until the bottom can be seen.
4 While tilting the upper case to your side, pull it out.
* When it is diffi cult to remove, remove the upper case
after removing the adjustable pocket.
1
on the right and
1
2
position
3
Bottom
4
Bottom
Cleaning
29