Asus P4R800-VM User Manual page 13

The RADEON™ 9100 IGP provides processor interface with 800/533/400 MHz
frequency, system memory interface at 400/333/266/200MHz operation, and 1.5V
AGP interface that supports AGP 8X specification.
The IXP 200 (SB200) is a subsystem that integrates various I/O functions including
dual-channel ATA100 bus master IDE controller, up to six USB 2.0/1.1 ports, I/O
APIC interrupt and Ethernet controllers, and LPC, AC'97 2.2 interfaces, Ethernet
controller, and PCI 2.2 interface. The proprietary A-Link interface connects the IXP
200 with the RADEON™ IGP at up to 266MB/s data transfer rate.
Dual channel DDR400 memory support
The P4R800-VM supports a single or dual memory architecture for up to 4GB
system memory. Four (4) 184-pin DIMM sockets are available for installation of
unbuffered non-ECC PC3200/2700/2100/1600 DDR DIMMs. See page 1-10.
ATi RADEON 9200-based GPU
Integrated in the IGP chipset is the ATI RADEON™ 9200-based 2D/3D graphics
engine with maximum 128MB shared display memory. The integrated graphics
also supports TV out function through a separate TV out module (AV/S). The
RADEON 9200-based GPU achieves a maximum resolution of 2048x1536 at
32bpp. See page 1-20.
Integrated 3Com 10/100 Mbps LAN MAC
Onboard is a Realtek 8201BL/CL LAN PHY that works with the integrated 3Com
MAC in the IXP 200 southbridge to fully support 10BASE-T/ 100BASE-TX Ethernet
networking. See page 1-17.
SoundMAX digital audio system
The SoundMax Digital Audio System is the industry's highest performance and
most reliable audio solution for business professionals, audiophiles, musicians,
and gamers. SoundMAX Digital Audio System can output 5.1 channel surround
and features state-of-the-art DLS2 MIDI synthesizer with Yamaha DLSbyXG sound
set, 5.1 Virtual Theater™ and supports all major game audio technologies
including Microsoft DirectX™8.0, Microsoft DirectSound 3D™, A3D, MacroFX,
ZoomFX, MultiDrive 5.1 and EAX. See page 1-17.
USB 2.0 connectivity
The P4R800-VM rear panel is equipped with four (4) Universal Serial Bus (USB)
ports to connect USB 2.0 devices. A USB header is also available at mid-board to
accommodate a USB module for two (2) additional USB ports. The USB ports and
header comply with USB 2.0 specification that supports up to 480 Mbps connection
speed. This speed advantage over the conventional USB 1.1 (12 Mbps) allows
faster Internet connection, interactive gaming, and simultaneous running of
high-speed peripherals. USB 2.0 is backward compatible with USB 1.1. See pages
1-17 and 1-21.
ASUS P4R800-VM motherboard user guide 1-3