Caple CGC610 Instruction Manual page 8

Slide the chimney to adjust the chimney height. When the height you
require is reached, attach the fixing hole to the fixing screws as shown
in below diagram.
Upper chimney
Lower chimney
Drill 2×8mm holes to accommodate the plate II. Screw and tighten the
plate II onto the wall with the 2 screws provided. Assemble the
chimney onto the unit and fix it with the 2 screws.
wall plug
Plate II
Screw (4mmx8mm)
Screw
(4mmx30mm)
7