Mounting The Loop Handle - Stihl KA 85 Instruction Manual

Mounting the Loop Handle

Loop handle with barrier bar
2
1
Fit the square nuts (1) in the barrier
N
bar (2); the holes must line up.
KA 85 R
4
5
6
1
Fit the clamp (3) in the loop
N
handle (4) and place them both on
the drive tube (5).
Place the clamp (6) in position.
N
Place the barrier bar (2) in position
N
as shown.
Line up the holes.
N
Insert the screws (7) and tighten
N
them down moderately against the
barrier bar.
Go to "Securing the loop handle".
N
2
3
7
Loop handle without barrier bar
8
8
7
7
4
3
5
6
1
1
Fit the clamp (3) in the loop
N
handle (4) and place them both on
the drive tube (5).
Place the clamp (6) in position.
N
Line up the holes.
N
Fit washers (7) on the screws (8)
N
and insert the screws in the holes.
Fit the square nuts (1) and screw
them down as far as stop.
Go to "Securing the loop handle".
N
English
35