Ford 2013 EXPEDITION Owner's Manual page 314

Hide thumbs Also See for 2013 EXPEDITION:

Table of Contents

2013 Expedition (exd)

Owners Guide gf, 3rd Printing, April 2013

I n f o r ma t i o n P r o v i d e d b y :

5. Release the three clamps that secure

the cover to the air filter housing. Push

the air filter cover toward the center of

the vehicle and up slightly to release it.

6. Remove the air filter element

from the air filter housing.

7. Install a new air filter element.

8. Replace the air filter housing

cover and secure the clamps. Be

careful not to crimp the filter

element edges between the air filter

housing and cover and ensure that

the tabs on the edge are properly

aligned into the slots.

9. Slip the air tube onto the air

filter housing and tighten the

air-tube clamp bolt snugly, but do

not overtighten it.

10. Reconnect the mass air flow

sensor electrical connector to the

outlet tube. Make sure the locking

tab on the connector is in the

"locked" position (connector shown

from below for clarity).