PTZOptics 20X-SDI User Manual
  1. Manuals
  2. Brands
  3. PTZOptics Manuals
  4. Conference System
  5. 20X-SDI
  6. User manual

PTZOptics 20X-SDI User Manual

Video conferencing camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

PTZ Optics 20X-SDI
User Manual
V3.1.1
(English)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20X-SDI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PTZOptics 20X-SDI

Summary of Contents for PTZOptics 20X-SDI

  • Page 1 PTZ Optics 20X-SDI User Manual V3.1.1 (English)

  • Page 2: Note

    Preface Thanks for using this HD Video Conferencing IP-Camera. This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly. Precautions This product can only be used in the specified conditions in order to avoid any damage to the camera: Don’t subject the camera to rain or moisture.

  • Page 3: Table Of Contents

    Contents Note ································································································ 3 Supplied Accessories ············································································· 4 Quick Start ························································································· 5 Features ···························································································· 8 Product Specification ············································································ 9 Main Unit ························································································ 10 IR Remote Controller Explanation ··························································· 11 Use IR Remote Controller ····································································· 13 RS-232 Interface ················································································ 16 Serial Communication Control ······························································· 18 Menu Setting ····················································································...
  • Page 4 Note " Electric Safety Installation and operation must accord with electric safety standard. " Caution to transport Avoid stress, vibration and soakage in transport, storage and installation. " Polarity of power supply The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as follows.

  • Page 5: Supplied Accessories

    Supplied Accessories When you unpack, check that all the supplied accessories are included: Camera ........1PCS AC power adaptor ...... 1PCS Power cord ........1PCS RS232 cable ......... 1PCS Remote controller ......1PCS User manual ....... 1PCS...

  • Page 6: Quick Start

    Quick Start Step1. Please check connections are correct before starting...
  • Page 7 Step2. Setting of the bottom switches Set both of the switch1 and switch2 to ‘OFF’. That is ‘Normal Working Mode’. SW-1 SW-2 Modes Normal Working Mode Step3. Setting of the system select switch The option of video format: VIDEO SYSTEM 1080i60 1080i50 720p60...
  • Page 8 the item [MENU] -> [RESTORE DEFAULT] -> [Restore]. Set the value [Yes], press [HOME] button to restore the factory default settings. RESTORE DEFAULT Restore Change Value [Home] OK [Menu] Back...

  • Page 9: Features

    Features 1. The camera provides a high performance in low illumination situations, particularly suitable for which room's lighting is not very well. 2. With maximum resolution of 1920 x 1080 and output frame rate up to 30 frames / sec, this camera provides high-definition as well as fluent video.

  • Page 10: Product Specification

    Product Specification Video Format 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, 720p/50, NTSC, PAL Video Output Interface HDMI,HD-SDI,CVBS Tilt Speed Range 1.7° ~ 69.9°/s Sensor Type CMOS,1/3 inch Vertical Flip&Mirror Support Effective Pixel: 2.12 million; Sensor Pixel Preset Total Pixel: 2.20million Scanning Mode Progressive Preset Accuracy 0.1°...

  • Page 11: Main Unit

    Main Unit 1. Audio LINE IN Interface 8. RS232 OUT jack 2. Audio LINE OUT Interface 9. Network 3. CVBS Interface 10. HDMI Interface 4. Dip switches 11. HD-SDI Interface 5. System select switch 12. USB2.0 6. RS485 jack 13. DC 12V jack 7.

  • Page 12: Ir Remote Controller Explanation

    IR Remote Controller Explanation 0. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power consumption standby mode approximately half of the normal mode) 1. Position Buttons To set preset or call preset 2.
  • Page 13 [MANUAL] button, and adjust it with [Focus ] (Focus on far object) and [Focus ] (Focus on near object) 6. Camera Select Buttons Press the button corresponding to the camera you want to operate with the remote controller. 7. # Button 8.

  • Page 14: Use Ir Remote Controller

    USE IR Remote Controller...
  • Page 15 When the camera is working, you can use remote controller to perform panning, tilting, zooming and focusing, store and call back preset positions. Button Instruction 1. In this instruction, ‘press the button’ means the press and relax the two actions. Such as ‘press [HOME] button’...
  • Page 16 2. Zoom Zoom Out: press [ZOOM ] button Zoom In: press [ZOOM ] button Press and hold the button, the camera will keep zooming in or zooming out and it stops as soon as the button is released.
  • Page 17 3. Focus Control 4. Backlight Switch BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to disable the backlight compensation. (Note: Backlight is only effective in full auto exposure mode) Focus Far: Press [FOCUS+] button (NOTE: Effective only in manual focus mode) 5.
  • Page 18 PRESET] button first and then press the numeric button 0-9. Note: Press [*]+[#]+[CLEAR PRESET] will erase all preset individually positions in the memory. 6. Recalling the Preset 1. To store a preset position: The users should press the [SET PRESET] button first and then press the numeric button 0-9.
  • Page 19 Press the button corresponding to the camera you want to operate. 8. Camera IR Address Set Press any of the numeric buttons 0-9 directly to recall stored preset positions and settings. Note: [*]+[ ]+[F1]: Address1 No action is executed if a relative preset [*]+[ ]+[F2]: Address2 position is not stored.

  • Page 21: Rs-232 Interface

    RS-232 Interface Camera Windows DB-9 1.DTR 1.CD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.IR OUT 7.RTS 8.NC 8.CTS 9.RI Function...
  • Page 22 Camera Mini DIN 1.DTR 1.DTR 2.DSR 2.DSR IR OUT 3.TXD 3.TXD 4.GND 4.GND 5.RXD 5.RXD 6.GND 6.GND 7.IR OUT 7.NC 8.NC 8.NC...
  • Page 23 VISCA Network Configuration...

  • Page 24: Serial Communication Control

    Serial Communication Control In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface. RS232!Communication!Control! The camera can be controlled via RS232 ,the parameters of RS232C are as follows: Baud rate: 2400/4800/9600 bit/s. Start bit: 1 bit.
  • Page 25 Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be called up after initialization) Then the users can control the camera with commands in the command list.
  • Page 26 VISCA Command List Part 1 Camera-Issued Messages Ack/Completion Message Command Function Command Packet Comments z0 4y FF Return when the command is accepted. (y: Socket No.) ACK/Comletion Messages z0 5y FF Return when the command has been Completion (y: Socket No.) executed.
  • Page 27 when received. Returned when a command which is being executed in a socket specified by z0 6y 04 FF Command Canceled the cancel command is canceled. The (y: Socket No.) completion message for the command is not returned. Returned when no command is executed z0 6y 05 FF in a socket specifild by the cancel No Socket...
  • Page 28 Command Function Command Packet Comments AddressSet Broadcast 88 30 01 FF Address setting IF_Clear Broadcast 88 01 00 01 FF I/F Clear 8x 01 04 00 02 FF CAM_Power Power ON/OFF 8x 01 04 00 03 FF Stop 8x 01 04 07 00 FF Tele(Standard) 8x 01 04 07 02 FF Wide(Standard)
  • Page 29 Auto/Manual 8x 01 04 38 10 FF 8x 01 04 47 0p 0q 0r 0s pqrs: Zoom Position CAM_ZoomFocus Direct 0t 0u 0v 0w FF tuvw: Focus Position Auto 8x 01 04 35 00 FF Normal Auto Indoor mode 8x 01 04 35 01 FF Indoor mode Outdoor mode 8x 01 04 35 02 FF...
  • Page 30 Shutter Priority Automatic Exposure Shutter priority 8x 01 04 39 0A FF mode Iris priority 8x 01 04 39 0B FF Iris Priority Automatic Exposure mode Bright 8x 01 04 39 0D FF Bright Mode(Manual control) CAM_SlowShutter AutoSlowShutterLimit 8x 01 04 2A 0p 00 FF Reset 8x 01 04 0B 00 FF 8x 01 04 0B 02 FF...
  • Page 31 Reset 8x 01 04 0E 00 FF 8x 01 04 0E 02 FF Exposure Compensation Amount Setting Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position 8x 01 04 33 02 FF CAM_BackLight Back Light Compensation On/Off 8x 01 04 33 03 FF...
  • Page 32 Direct 8x 01 04 42 00 00 0p 0q FF pq: Aperture Gain 8x 01 04 63 00 FF CAM_PictureEffect Picture Effect Setting B&W 8x 01 04 63 04 FF Reset 8x 01 04 3F 00 pp FF CAM_Memory 8x 01 04 3F 01 pp FF pp: Memory Number(=0 to 127) Recall 8x 01 04 3F 02 pp FF...
  • Page 33 Upright 8x 01 06 01 VV WW 02 01 FF ZZZZ: Tilt Position DownLeft 8x 01 06 01 VV WW 01 02 FF DownRight 8x 01 06 01 VV WW 02 02 FF Stop 8x 01 06 01 VV WW 03 03 FF 8x 01 06 02 VV WW AbsolutePosition 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF...
  • Page 34 8x 01 04 A4 00 FF Flip-H 8x 01 04 A4 01 FF CAM_Flip Single Command For Video Flip Flip-V 8x 01 04 A4 02 FF Flip-HV 8x 01 04 A4 03 FF CAM_SettingSave Save 8x 01 04 A5 10 FF Save Current Setting CAM_Iridix Direct...
  • Page 35 y0 50 03 FF Off(Standby) y0 50 04 FF Internal power ciruit error CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_FocusAFMode y0 50 02 FF Auto Focus 8x 09 04 38 FF y0 50 03 FF Manual Focus CAM_FocusPosInq...
  • Page 36 CAM_BrightPosInq 8x 09 04 4D FF y0 50 00 00 0p 0q FF pq: Bright Position y0 50 02 FF CAM_ExpCompMod 8x 09 04 3E FF eInq y0 50 03 FF CAM_ExpCompPosI 8x 09 04 4E FF y0 50 00 00 0p 0q FF pq: ExpComp Position CAM_BacklightMode y0 50 02 FF...
  • Page 37 CAM_MemoryInq 8x 09 04 3F FF y0 50 0p FF p: Memory number last operated. y0 50 02 FF SYS_MenuModeInq 8x 09 06 06 FF y0 50 03 FF y0 50 02 FF CAM_LR_ReverseInq 8x 09 04 61 FF y0 50 03 FF y0 50 02 FF CAM_PictureFlipInq 8x 09 04 66 FF...
  • Page 38 ab: Factory Code(00: VHD, 01:MR, 08:T) cd: Hardware Version mnpq: ARM Version y0 50 ab cd CAM_VersionInq 8x 09 00 02 FF rstu: FPGA Version mn pq rs tu vw FF vw: Camera model 01: C Type 02: M Type 03: S Type y0 50 00 FF 1920x1080i60...
  • Page 39 y0 50 0D FF y0 50 0E FF y0 50 02 FF IR_Receive 8x 09 06 08 FF y0 50 03 FF ww: Pan Max Speed Pan-tiltMaxSpeedInq 8x 09 06 11 FF y0 50 ww zz FF zz: Tilt Max Speed y0 50 0w 0w 0w 0w wwww: Pan Position Pan-tiltPosInq...
  • Page 40 y0 50 02 FF Normal y0 50 03 FF CAM_BrightnessInq 8x 09 04 A1 FF y0 50 00 00 0p 0q FF pq: Brightness Position CAM_ContrastInq 8x 09 04 A2 FF y0 50 00 00 0p 0q FF pq: Contrast Position y0 50 00 FF y0 50 01 FF Flip-H...
  • Page 41 Command Command packed Inquiry Packet Comments uuuu: Zoom Position y0 50 0u 0u 0u 0u 00 00 0v 0v CAM_LensBlockInq 8x 09 7E 7E 00 FF vvvv: Focus Position 0v 0v 00 0w 00 FF w.bit0: Focus Mode 1: Auto 0: Manual pp: R_Gain qq: B_Gain r: WB Mode...
  • Page 42 p: AF sensitivity q.bit0: Picture flip(1:On, 0:Off) rr.bit6~3: Color Gain(0h(60%) to CAM_EnlargementBl y0 50 00 00 00 00 00 00 00 0p Eh(200%)) 8x 09 7E 7E 03 FF ockInq 0q rr 0s 0t 0u FF s: Flip(0: Off, 1:Flip-H, 2:Flip-V, 3:Flip-HV) t.bit2~0: NR2D Level u: Gain Limit...
  • Page 43 Pelco-D Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 0xFF Address 0x00 0x08 Pan Speed Tilt Speed Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed Right 0xFF Address 0x00 0x02...
  • Page 44 Byte Byte Query Zoom Position 0xFF Address 0x00 0x55 0x00 0x00 Query Zoom Position Value High Value Low 0xFF Address 0x00 0x5D Response Byte Byte...
  • Page 45 Pelco-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF Down 0xA0 Address 0x00 0x10 Pan Speed Tilt Speed 0xAF Left 0xA0 Address 0x00 0x04 Pan Speed Tilt Speed 0xAF Right 0xA0...
  • Page 46 Response Byte Byte Query Zoom Position 0xA0 Address 0x00 0x55 0x00 0x00 0xAF Query Zoom Position Value High Value Low 0xA0 Address 0x00 0x5D 0xAF Response Byte Byte...

  • Page 47: Menu Setting

    Menu Setting 1. MENU MENU Press [MENU] button to display the main menu Exposure on the normal screen, using arrow button to move Color the cursor to the item to be set. Press the [HOME] Image button to enter the corresponding sub-menu. P/T/Z Noise Reduction Setup...
  • Page 48 main menu and press [home] button, EXPOSURE Optional items: On, Off (Effective only in Auto menu appears, as shown in the following figure. mode) ExpComp: Exposure compensation value, EXPOSURE Optional items:-7 ~ 7(Effective only in Mode Auto ExpComp Mode item to On) ExpCompMode Gain Limit: Maximum gain limit.
  • Page 49 F2.0,F2.4,F2.8,F3.4,F4.0,F4.8,F5.6,F6.8,F8.0,F9.6,F COLOR 11.0,Close Effective only in Manual, AAE mode WB Mode Auto Shutt: Shutter value. Optional items: 1/30,1/60, RG Tuning 1/90,1/100,1/125,1/180,1/250,1/350,1/500,1/725,1/1 BG Tuning 000,1/1500,1/2000,1/3000,1/4000,1/6000,1/10000 Saturation 100% (Effective only in Manual, SAE mode) IR Filter 3. COLOR AWB sens Move the cursor to the Color item in the main Style Style1 menu and press [home] button, COLOR menu...
  • Page 50 BG: Blue gain. Optional items: menu and press [home] button, IMAGE menu 0~255 Effective only in Manual mode appears, as shown in the following figure. RG Tuning: Red gain fine-tuning, Optional IMAGE items: -10~10 Effective only in Auto, Indoor, Luminance Outdoor mode Contrast BG Tuning :Blue gain fine-tuning, Optional...
  • Page 51 0 ~ 14 P/T/Z Sharpness: Sharpness adjustment. Optional SpeedByZoom On items: Auto, 0 ~ 15 AF-Zone Center Flip-H: Image flipped horizontally. Optional AF-Sense items: On, Off. Flip-V: Image Flip Vertical. Optional items: On, Off B&W-Mode: Image color. Optional items: On, Gamma: Optional items: Default, 0.45, 0.5, Select Item 0.56, 0.63...
  • Page 52 options, Optional items: Low, Normal, High NOISE REDUCTION NR2D-Level 3 NR3D-Level 3 6. NOISE REDUCTION D-HotPixel Move the cursor to the Noise Reduction item in the main menu and press [home] button, NOISE REDUCTION menu appears, as shown in the following figure.
  • Page 53 items: Off, 1 ~ 5 SETUP Language 7. SETUP Protocol VISCA Move the cursor to the Setup item in the main V_Address menu and press [home] button, SETUP menu V_AddrFix appears, as shown in the following figure. Net Mode Serial Baudrate 9600 Select Item...
  • Page 54 according to the agreement, AUTO, VISCA protocol DEFAULT menu appears, as shown in the following Optional items: 1 ~ 7 figure. P_D_Address: PELCO-D protocol Optional RESTORE DEFAULT items: 0 ~ 254 Restore? P_P_Address: PELCO-P protocol Optional items: 0 ~ 31 V_AddrFix: If I can change through the serial port of infrared switch, Optional items: On, Off When set to On, useless in 88 30 01 FF...

  • Page 55: Equipment Setup And Internet Connection

    address and VISICA Address Save: Save Options. Optional items: Yes, No Equipment Setup and internet connection 1. Operating Environment Operating System: Windows 2000/2003/XP/vista/7 Network Protocol: TCP/IP Client PC: P4/128MRAM/40GHD/ support scaled graphics card, support DirectX8.0 or more advanced version.
  • Page 56 2. Equipment Installation 1) Connect internet camera to your internet or to your PC directly via internet cable. 2) Turn on DC12V power. 3) The orange light of internet port lit on, green light flashing, and the physical connection finished. 3.

  • Page 57: Ip Camera Visited/ Controlled By Lan

    Picture 1.2 Connect by router /interchanger IP camera visited/ controlled by LAN Setup IP address 1.1 Connect IP Camera to internet (or PC), then turn on the power on IP Camera, shown as above. IP address can be searched via update software(software upgrading tool,named upgrade_En.exe in small CD in package). shown as below: Run upgrade_En.exe (UPGRADE v1.8) by CD-Rom, click [Search].The software will show the current LAN camera's IP address, subnet mask number, network gateway number and camera MAC serial number etc, shown...
  • Page 58 If IPC IP address and PC IP address not in the same internet segment, upgrade_En.exe can modify IP address, subnet mask and port number etc. accordingly.
  • Page 59 In UPGRADE v1.8, select the camera needed to be modified, shown as below: Click “config” then go to below:...
  • Page 60 Enter new IP in "IP" bar, subnet mask in "Mask" bar, Gateway,First DNS, MAC address,and click “Set”. Shown as above.(For example: if your PC IP is 192.168.1.88, then camera IP must be 192.168.1.xx, the first, second, third number must keep the same)
  • Page 61 NOTE IP camera default IP address"192.168.100.88", user "admin", password "admin". Visit/Access IP Camera 2.1 Input http://192.168.100.88 to IE ( better with IE web browser, others will cause little latency),a login window pop up, input login name: admin, password: admin, shown as below:...
  • Page 62 2.2 Input login name and password, click "confirm", then pop up below window, language select button on the left bottom:...
  • Page 63 NOTE...

  • Page 64: Ip Camera Accessed/Controlled By Wan (Internet)

    If user first time use this camera by internet (only for new user), must install a player software (VLC). Then Install VLC Please go to http://4dx.pc6.com/xy/vlcplayer.zip,pop out the download window, click“Save”. (player software), After installation,login again,will show as above: IP Camera accessed/controlled by WAN (internet) 1.
  • Page 65 picture for reference,the position is the same)

  • Page 66: Vlc Stream Media Player Monitoring

    Dynamic DNS visit camera 1.1 Camera accessed by dynamic DNS Set domain name to camera, setup the parameter, then dynamic DNS can access camera. Access link http://hostname :port number For example, setup host computer name: youdomain.f3322.org, camera port number: 554, Access link should be: http://youdomain.3322.org:554 NOTE...
  • Page 67 1.1 Open VLC media player, click "Media" "Open Network Steam", or click "Ctrl+N"; as below: 1.2 Input URL address: rtsp://ip: port number/1 (Main stream); rtsp://ip: port number/2(sub stream)(When RTSP port number default value is 554,then can be omitted as rtsp://ip/1 or rtsp://ip/2)

  • Page 68: Ip Camera Parameter Setup

    IP Camera parameter setup Homepage introduction 1.1 Menu All pages include 2 menu bars: Real time monitoring: displaying video image...
  • Page 69 Parameter setup: with function buttons 1.2 Video viewing window Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is. Double click viewing window, will show full-screen, double click again, will return to initialized size. Status bar in viewing window shown as below Video playback pause button: control real-time video pause, stop the last picture, click recoverable video again.
  • Page 70 1) PTZ direction control box: Up, down, left, right, home oblique button as above 2) Rate: Vertical speed can be chosen as 1 ~ 24, horizontal direction at the rate of 1 ~ 20. select corresponding speed and click direction button to realize PTZ speed up or speed down.
  • Page 71 3) Zoom In/Zoom out: for zooming in or zooming out, Focus In/ Focus Out: Focusing on distant objects or Focusing on close objects. 4) Set/Call: When PTZ turn to expected position, can set up a number of preset that user want. click "Set"...
  • Page 73 Video format Support 50HZ(PAL)and 60HZ(NTSC),and Dial priority three formats. Video Coding Support baseline and mainprofile format Resolution Main bit flow support 1920x1080,1280x720,minor bit flow support 640x360,320x180,the bigger resolution is, the clearer the image will be, more network bandwidth will be taken. Bit Rate User can assign bit flow/stream, normally speaking, the bigger bit flow is, the clearer the image will be.
  • Page 74 Constant bit rate: video coder will be coding according to preset speed Variable bit rate: video coder will adjust the speed based on preset speed to gain the best image quality. I key frame interval: Set interval between 2 I frame, the bigger interval is, the response will be lower from viewing window. Fluctuate level Restrain the fluctuation magnitude of variable rate, grade 1 ~ 6 Image Setup,please click “Image”...
  • Page 76 Brightness Image bright 0~100, slider control, on the right shows the corresponding numerical. Default 43. Saturation Saturation 0~100, slider control, on the right shows the corresponding numerical. Default 50. Contrast Contrast0~100, slider control, on the right shows the corresponding numerical. Default 57. Sharpness Sharpness0~100, slider control, on the right shows the corresponding numerical.
  • Page 77 Audio Setup,please click “Audio” Audio Type Audio type AAC Sample rate Sample rate 44.1 K and 48 K,selectable.
  • Page 78 Bit rate Bit rate 96k,128k,256k,selectable Input Type line in only Input VolL The volume of the left channel Input VolR The volume of the right channel Button Press "apply" button to save parameters, press "cancel" button to cancel parameter System Setting,please click “System”...
  • Page 79 Work Mode Work Mode RTSP Reboot Click the "Reboot" button, system restart. User and password The user can modify the password (letters and Numbers only) Apply / Cancel Modify password and click the "apply" button to the login page, press "cancel" button to cancel password change.
  • Page 81 Lan Settings! Default the IP address is 192.168.100.88, The MAC address can be modified. Port Settings! IP address identifies the network device, the device can run multiple web applications, each network program using network port to transmit data, so data transmission to be carried out between the port and port.
  • Page 82 Modify network parameters then press "Apply" button to modify network parameters, press "Cancel" button to cancel network parameters. Device Information,please click “information” Show the current device information, as shown below.

  • Page 83: Network Control

    Network Control 1. View from Web browser (better in IE) " To view from web browser, firstly need to check camera IP address. There are 2 methods to check: Method 1: press * and # and 4 on remote controller one by one, the camera IP address will be shown on screen.
  • Page 85 Method 2: Open “upgrade_En.exe”, change IP and click “Set” Once IP changed, need to restart the camera. 2 methods to restart as below: Method 1: Turn off and turn on manually to restart camera...
  • Page 86 Method 2: On web page, find “System” and click “Apply” (when under remote controlling environment, better use this method)
  • Page 87 PTZ ON IP NETWORK This model currently supports various PTZ control methods, including RS232, RS485, IR remote control, HTTP CGI, and TCP protocol. The following is the detailed description about HTTP CGI and TCP Protocol control methods. 1. TCP Protocol Method This model implements TCP server inside, there is a port configurated by Web for receiving the connection from TCP client,the TCP port number is 5678.
  • Page 88 Far(Standard) 81 01 04 08 02 FF Near(Standard) 81 01 04 08 03 FF Far(Variable) 81 01 04 08 2P FF P = 0(low speed) - 7(high speed) Near(Variable) 81 01 04 08 3P FF Auto Focus 81 01 04 38 02 FF Manual Focus 81 01 04 38 03 FF AF On/Off...
  • Page 89 2. HTTP CGI Method This camera integrated with web server inside, support CGI related with PTZ. 2.1 Pan and Tilt control URL format as below: http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[pan speed]&[tilt speed] More descriptions: [Camera IP]: This camera IP address; [action] including up, down, left, right, ptzstop; [pan speed] : 1(low speed) –...
  • Page 90 More descriptions: [Camera IP]: This camera IP address; [action] including: focusin, focusout, focusstop; [focus speed]: 0(low speed) – 7(high speed) 2.4 Preset Position control URL format as below: http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[position number] More descriptions: [Camera IP]: This camera IP address; [action] including: posset, poscall; [position number]: 0-89,100-254.

  • Page 91: Maintenance And Troubleshooting

    Maintenance and Troubleshooting Camera Maintains " If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet. " Use soft cloth or tissue to clean the camera cover. "...
  • Page 92 3. Check the BOTTOM switch and make sure the two switches are both set OFF. 4. Check video cable is connected correctly. " Abnormal display of image Check video cable is connected correctly. " Image dithering even at widest zoom position 1.
  • Page 93 5. Web port is occupied by other devices. " When modify IP address in an incorrect way cause the wrong IP address or forget web passwords, press the IR remote controller "[*]+[ ]+[Manual]" to restore the default value (Default IP: 192.168.100.88 Default username: admin Default password: admin) Sound "...

  • Page 94: Copyright Notice

    Copyright Notice All contents of this manual, whose copyright belongs to our company. Cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only, and the content will be updated at any time without prior notice 2014/11...

Table of Contents

Save PDF