Troubleshooting - Panasonic ES?LT33 Operating Instructions Manual

Troubleshooting

Problem
The power switch cannot
be pressed.
Trimmed hairs fly all over.
System outer foil gets hot.
The blades do not dry.
The odor is getting
stronger.
You do not get as close a
shave as before.
Makes a loud sound.
Action
Unlock the power switch.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil if it
is damaged or deformed.
(See page 12.)
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.
This can be improved by cleaning
every time after shaving.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Confirm that the blades are
properly attached.
The shaver makes a high‑pitched
sound due to the linear motor drive.
This does not indicate a problem.
Problem
The shaver cannot be
charged.
Operating time is short
even after charging.
Shaver stopped
functioning.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorized by Panasonic for
repair.
Action
The recommended temperature
for charging is 10 – 35 °C
(50 – 95 °F). If charged at a
temperature other than the
recommended temperature, the
shaver may take longer to charge
or may not charge at all.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Recommended ambient
temperature for operation is
5 – 35 °C (41 – 95 °F). The
shaver may stop functioning when
out of recommended ambient
temperature range.
The battery has reached the end
of its life.
13