Gigabyte 6VM7-4I User Manual page 67

• • • •
OnBoard Serial Port 2
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
• • • •
Serial Port 2 Mode
ASKIR
IrDA
Normal
• • • •
Duplex Mode
Half Duplex
N/A
Full Duplex
• • • •
OnBoard Parallel port
378
278
3BC
Auto
Disabled
• • • •
Parallel Port Mode
EPP
ECP
Normal
• • • •
Parallel Port DMA
Auto
N/A
3
1
0
• • • •
Parallel Port IRQ
Set Auto to parallel Port IRQ DMA Channel. (Default Value) .
Auto
N/A Disabled this function.
5 Set Parallel Port IRQ is 5.
7 Set Parallel Port IRQ is 7.
BIOS will automatically setup the port 2 address (Default Value) .
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8.
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Set onboard I/O chip Serial Port 2 to ASKIR Mode.
Set onboard I/O chip Serial Port 2 to IrDA Mode.
Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
IR Function Duplex Half.
Disabled this function. (Default Value)
IR Function Duplex Full.
Enable onboard LPT port and address is 378.
Enable onboard LPT port and address is 278.
Enable onboard LPT port and address is 3BC.
Set onboard LPT port is Auto. (Default Value) .
Disable onboard LPT port.
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port. (Default Value)
Normal Operation.
Set Auto to parallel port mode DMA Channel. (Default Value)
Disabled this function.
Set Parallel Port DMA is 3.
Set Parallel Port DMA is 1.
Set Parallel Port DMA is 0.
60
BIOS Setup