Hide thumbs Also See for 6VM7-4I:

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
Model Number:
GA-6VM7-4I
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Feb. 9, 2001
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
residential
installations.
generates,
uses,
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
harmful
interference
This
equipment
and
can
radiate
in
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte 6VM7-4I

  • Page 1 Model Number: GA-6VM7-4I frequency energy, and if not installed and used Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), in accordance with the instructions, may cause Class B Digital Device Supplementary Information: harmful interference to radio communications.
  • Page 2: Declaration Of Conformity

    Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6VM7-4I is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...
  • Page 3 6VM7-4I Socket 370 Processor Motherboard USER'S MANUAL Socket 370 Processor Motherboard REV. 5.0 Second Edition R-50-02-010628 12ME-6VM74I-5002...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision History Manual revision information 2) Item Checklist Product item list 3) Features Product information & specification 4) Hardware Setup Instructions on setting up the motherboard 5) Performance &...
  • Page 7: Table Of Contents

    Table Of Content Revision History Item Checklist Summary of Features 6VM7-4I Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Performance List P.31 Block Diagram P.32 Suspend to RAM Installation P.33 Memory Installation P.39 Page Index for BIOS Setup P.40...
  • Page 8: Revision History

    6VM7-4I Motherboard Revision History Revision Revision Note Date Initial release of the 6VM7-4I motherboard user’s manual. Jan.2001 Second release of the 6VM7-4I motherboard user’s Jun.2001 manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein.
  • Page 9: Item Checklist

    Item Checklist Item Checklist The 6VM7-4I motherboard Cable for IDE / floppy device Diskettes or CD (TUCD) for motherboard driver & utility 6VM7-4I user’s manual...
  • Page 10: Summary Of Features

    6VM7-4I Motherboard Summary Of Features 24.3 cm x 21.0 cm micro ATX size form factor, 4 layers Form Factor PCB. Socket 370 processor Intel Pentium  !!! 100/133MHz FSB, FC-PGA Intel Celeron TM 66MHz FSB, FC-PGA VIA Cyrix III 100 MHz FSB, CPGA ®...
  • Page 11 Summary of Features   PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface BIOS Licensed AMI BIOS, 2M bit flash ROM On-Board Sound Build in VIA 82C686B Additional Features Includes 3 fan power connectors. Poly fuse for keyboard over-current protection Support STR (Suspend-To-RAM) function Support Wake-on-LAN (WOL) Support Internal / External modem wake up...
  • Page 12: 6Vm7-4I Motherboard Layout

    6VM7-4I Motherboard 6VM7-4I Motherboard Layout ATX POWER PS/2 LED1 JP16 LED2 PGA 370 JP15 JP11 VT82C 694X BAT1 6VM7-4I JP23 AGP 1 JP26 PCI1 PCI2 VT82C BIOS 686B JP18 JP22 ISA1...
  • Page 13: Page Index For Cpu Speed Setup / Connectors / Panel And Jumper

    6VM7-4I Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Page Definition CPU Speed Setup Connectors P.15 Game & Audio Port P.15 COM A / COM B / LPT Port P.15 USB 1 Connector P.16 PS/2 Keyboard &...
  • Page 14: Cpu Speed Setup

    6VM7-4I Motherboard CPU Speed Setup The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 500MHz – 1GHz and above processor.
  • Page 15 CPU Speed Setup Intel Processor all have locked Frequency Multiple, so you can not change the CPU Frequency Multiple. For Auto Jumper Setting: Note: 1. If you use 66/100/133 MHz CPU, We recommend you to setup your system speed to “Auto”...
  • Page 16 6VM7-4I Motherboard 2. Celeron 566/ 66 MHz FSB 3. Celeron 600/ 66 MHz FSB 4. Celeron 633/ 66 MHz FSB 5. Celeron 667/ 66 MHz FSB...
  • Page 17 CPU Speed Setup 6. Celeron 700/ 66 MHz FSB 7. Cryix III 550/100MHz FSB 8. Cryix III 600/100MHz FSB !!! 500/100MHz FSB 9. Pentium ®...
  • Page 18 6VM7-4I Motherboard !!! 550/100MHz FSB 10. Pentium ® !!! 600/100MHz FSB 11. Pentium ® !!! 650/100MHz FSB 12. Pentium ® !!! 700/100MHz FSB 13. Pentium ®...
  • Page 19 CPU Speed Setup !!! 750/100MHz FSB 14. Pentium ® !!! 800/100MHz FSB 15. Pentium ® !!! 850/100MHz FSB 16. Pentium ® !!! 533/133MHz FSB 17. Pentium ®...
  • Page 20 6VM7-4I Motherboard !!! 600/133 MHz FSB 18. Pentium ® !!! 667/133MHz FSB 19. Pentium ® !!! 733/133MHz FSB 20. Pentium ® !!! 800/133MHz FSB 21. Pentium ®...
  • Page 21 CPU Speed Setup !!! 866/133MHz FSB 22. Pentium ® !!! 933/133MHz FSB 23. Pentium ® !!! 1GHz/133MHz FSB 24. Pentium ®...
  • Page 22: Connectors

    6VM7-4I Motherboard Connectors Game & Audio Port Game Port Line Out Line In COM A / COM B / LPT Port LPT Port COM B COM A...
  • Page 23: Definition

    Connectors USB 1 Connector Pin No. Definition USB V0 USB D0- USB D0+ USB V1 USB D1- USB D1+ 5 6 7 8 PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition Data VCC(+5V) Clock...
  • Page 24: Usb 2 Connector

    6VM7-4I Motherboard USB 2 Connector Pin No. Definition 5V-SB USB D2- USB D2+ USB D3+ USB D3- 5V-SB JP16 : CPU Fan Pin No. Definition +12V SENSE...
  • Page 25: Jp15 (Power Fan)

    Connectors JP15 : Power Fan Pin No. Definition +12V JP2 : Sysem Fan Pin No. Definition +12V SENSE...
  • Page 26: Atx Power

    6VM7-4I Motherboard ATX Power Pin No. Definition 3,5,7,13, 15-17 1,2,11 3.3V 4,6,19,20 +12V -12V Power Good 5V SB stand by+5V PS-ON(Soft On/Off) Floppy Port Red Line FDD1...
  • Page 27: Ide1(Primary), Ide2(Secondary) Port

    Connectors IDE1(Primary), IDE2(Secondary) Port Red Line IDE 1 IDE 2 J7 : TEL: The connector is for Modem with internal voice connector Pin No. Definition Signal-In Signal-Out...
  • Page 28: J5 (Aux_In)

    6VM7-4I Motherboard J5 : AUX_IN Pin No. Definition AUX-L AUX-R J8 : CD Audio Line In Pin No. Definition CD-L CD-R...
  • Page 29: J13 (Ir)

    Connectors J13 : IR Pin No. Definition VCC (+5V) IR Data Input IR Data Output J3 : Ring Power On (Internal Modem Card Wake Up) Pin No. Definition Signal...
  • Page 30: J1 (Wake On Lan)

    6VM7-4I Motherboard J1 : Wake On LAN Pin No. Definition +5VSB Signal JP3 : Audio Out Pin No. Definition Line Out (R) Line Out (L) Analog GND Digital GND +12V...
  • Page 31: Jp26 (Cd_In)

    Connectors JP26 : CD_IN Pin No. Definition CD_IN Left CD Ground Ground CD_IN Right JP5 / LED1 / LED2(Optional) : STR LED Connector & DIMM LED STR LED Connector External. DIMM LED...
  • Page 32: Panel And Jumper Definition

    6VM7-4I Motherboard Panel and Jumper Definition J2 : 2x11 Pins Jumper GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode(−) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(−)
  • Page 33: J12 (2X7 Pins Jumper)

    Panel and Jumper Definition J12 : 2x7 Pins Jumper (Optional) S P K HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(−) SPK (Speaker Connector) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(−) RE (Reset Switch) Open: Normal Operation Close: Reset Hardware System...
  • Page 34: Jp1 (Clear Cmos Function)

    6VM7-4I Motherboard JP1 : Clear CMOS Function Pin No. Definition 1-2 Close Normal (Default) 2-3 Close Clear CMOS JP23 : Case Open Pin No. Definition Signal...
  • Page 35: Jp7/Jp8/Jp18 (Onboard Ac97& Amr Select)

    Panel and Jumper Definition JP7/JP8/JP18 : Onboard AC97& AMR (Primary or Secondary ) Select (AMR Audio Modem Riser) JP18 Jumper JP18 Function Only AC97 1-2 Close Open Close Only AMR 3-4 Close Open (Primary) Close AC97+MR 1-2 Close (Secondary) Close Close 3-4 Close (Default)
  • Page 36: Jp22 (Bios Write Protection)

    6VM7-4I Motherboard JP22 : BIOS Write Protection Pin No. Definition Open Normal (Default) Close BIOS Write Protection Please Set Jumper JP22 to ”Open” to enabled BIOS Write Function when you update new BIOS or new device JP11 : STR Function Enabled...
  • Page 37: Bat1(Battery)

    Panel and Jumper Definition BAT1 : Battery CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
  • Page 38: Performance List

    6VM7-4I Motherboard Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.)
  • Page 39: Block Diagram

    Block Diagram Block Diagram 14.318MHz 3.3V DIMM AGP 2X/4X PGA 370 CPU DIMM Sockets Host Bus AGP Bus VT82C694X Ultra DMA 33/ATA66 /ATA100 IDE Ports 33 MHz 9248DF-39 PCI Bus 33 MHz 24MHz 48MHz ISA Bus 14.318MHz VT82C686B IDE Bus COM Ports AC’97-Link Floppy...
  • Page 40: Suspend To Ram Installation

    6VM7-4I Motherboard Suspend To RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state.
  • Page 41 Suspend to RAM Installation Step 2: (If you want to use STR Function, please set jumper JP11 Closed.) Pin No. Definition Open Normal (Default) Close STR Enabled Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter ACPI Sleep BIOS Setup.
  • Page 42 6VM7-4I Motherboard A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B. Choose the “Stand by” item and press “OK”...
  • Page 43 Suspend to RAM Installation Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 44 6VM7-4I Motherboard C. Select the “Advanced” tab and “Standby” mode in Power Buttons. D. Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button. A.4 How to recover from the STR sleep mode? There are five ways to “wake up”...
  • Page 45 Suspend to RAM Installation A.5 Notices : In order for STR to function properly, several hardware and software requirements must be satisfied: Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). Your SDRAM must be PC-100 compliant.
  • Page 46: Memory Installation

    6VM7-4I Motherboard Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 47: Page Index For Bios Setup

    BIOS Setup Page Index for BIOS Setup Page The Main Menu P.42 Standard CMOS Setup P.44 BIOS Features Setup P.47 Chipset Features Setup P.49 Power Management Setup P.52 PNP/ PCI Configuration P.55 Load BIOS Defaults P.57 Load Setup Defaults P.58 Integrated Peripherals P.59 Hardware Monitor Setup...
  • Page 48: Entering Setup

    6VM7-4I Motherboard BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 49: The Main Menu

    BIOS Setup GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 50 6VM7-4I Motherboard • • • • Chipset Features Setup This setup page includes all the items of chipset special features. • • • • Power Management Setup This setup page includes all the items of Green function features. • • • •...
  • Page 51: Standard Cmos Setup

    BIOS Setup Standard CMOS Setup The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. AMIBIOS SETUP –...
  • Page 52 6VM7-4I Motherboard • • • • Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. • • • • IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer.
  • Page 53: Extended Memory

    BIOS Setup • • • • Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time.
  • Page 54: Bios Features Setup

    6VM7-4I Motherboard BIOS Features Setup AMIBIOS SETUP – BIOS FEATURES CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device :Floppy 2nd Boot Device :IDE-0 3rd Boot Device :CDROM S.M.A.R.T for Hard Disks :Disabled BootUp Num-Lock...
  • Page 55: Password Check

    BIOS Setup • • • • S.M.A.R.T. for Hard Disks Enable Enable S.M.A.R.T. Hard for Disks. Disable S.M.A.R.T. Hard for Disks. (Default Value) Disable • • • • Boot Up Num-Lock Keypad is number keys. (Default Value) Keypad is arrow keys. •...
  • Page 56: Chipset Features Setup

    6VM7-4I Motherboard Chipset Features Setup AMIBIOS SETUP –CHIPSET FEATURE CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved *** DRAM Timing *** Top Performance :Disabled SDRAM Timing by SPD :Disabled SDRAM CAS# Latency DRAM Frequency :Auto C2P Concurrency & Master...
  • Page 57 BIOS Setup • • • • C2P Concurrency & Master Enabled C2P Concurrency & Master. (Default Value) Enabled Disabled Disabled C2P Concurrency & Master. • • • • DRAM Integrity Mode For 72 bit ECC type DIMM Modle. Normal Setting. (Default Value) Disabled •...
  • Page 58: Usb Controller

    6VM7-4I Motherboard • • • • South Bridge Subsystem ID Disabled Disable it if you have to install VIA 4 in 1 SP4.22 or before. (Default Value) Enabled Enable south bridge subsystem ID function. • • • • USB Controller Set USB Controller Function used all USB Port.
  • Page 59 BIOS Setup Power Management Setup AMIBIOS SETUP –POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type :S1/POS PME Event Wake up :Enabled USB KB Wakeup From S3-S5 :Disabled RTC Alarm Power On :Disabled Video Power Down Mode :Stand By RTC Alarm Date...
  • Page 60 6VM7-4I Motherboard • • • • Suspend Time Out (Minute.) Disabled Suspend Time Out Function. (Default Value) Disabled Enabled Suspend Time Out after 1min. Enabled Suspend Time Out after 2min. Enabled Suspend Time Out after 4min. Enabled Suspend Time Out after 8min.
  • Page 61 BIOS Setup • • • • Modem Use IRQ Set Modem Use IRQ to NA. Set Modem Use IRQ to 3. Set Modem Use IRQ to 4. (Default Value) Set Modem Use IRQ to 5. Set Modem Use IRQ to 7. •...
  • Page 62: Reset Configuration Data

    6VM7-4I Motherboard PnP/PCI Configurations AMIBIOS SETUP –PNP/PCI CONFIGURATION SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Plug and Play Aware O/S Reset Configuration Data VGA Boot From :AGP PCI VGA Palette Snoop :Disabled DMA Channel 0 :PnP...
  • Page 63 BIOS Setup • • • • DMA Channel (0,1,3,5,6,7) The resource is used by PnP device. ISA / EISA The resource is used by ISA / EISA device (PCI or ISA). • • • • IRQ (3,4,5,7, 9,10,11,14,15) PCI/PnP The resource is used by PCI/PnP device. ISA / EISA The resource is used by ISA / EISA device (PCI or ISA).
  • Page 64: Power Management Setup

    6VM7-4I Motherboard Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD...
  • Page 65: Load Setup Defaults

    BIOS Setup Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION Load SETUP Defaults (Y/N)? N...
  • Page 66: Integrated Peripherals

    6VM7-4I Motherboard Integrated Peripherals AMIBIOS SETUP –INTEGRATED PERIPHERAL ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE :Both Game Port (200h-207h) :Enabled OnBoard FDC :Auto OnBoard Serial Port 1 :Auto OnBoard Serial Port 2 :Auto Serial Port 2 Mode...
  • Page 67 BIOS Setup • • • • OnBoard Serial Port 2 BIOS will automatically setup the port 2 address (Default Value) . Auto 3F8/COM1 Enable onboard Serial port 2 and address is 3F8. 2F8/COM2 Enable onboard Serial port 2 and address is 2F8. 3E8/COM3 Enable onboard Serial port 2 and address is 3E8.
  • Page 68 6VM7-4I Motherboard • • • • OnBoard AC’97 Audio Set AC’97 Audio to Auto (Default Value) . Auto Disabled Disabled AC’97 Audio. • • • • OnBorard MC’97 Modem Set MC’97 Modem to Auto (Default Value) . Auto Disabled Disabled MC’97 Modem.
  • Page 69 BIOS Setup • • • • FM Port (388h-38Bh) Disabled FM Port (388h-38Bh). (Default Value) Disabled Enabled Enabled FM Port (388h-38Bh). • • • • Game Port (200h-207h) Disabled Disabled Game Port (200h-207h). Enabled Game Port (200h-207h). (Default Value) Enabled...
  • Page 70 6VM7-4I Motherboard Hardware Monitor AMIBIOS SETUP –HARDWARE MONITOR ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Shut Down Temp. :Disabled Current CPU Temp. :36°C/96°F Current System Temp. :28°C/82°F Case Status :Closed Current CPU Fan Speed :5487 RPM...
  • Page 71 BIOS Setup • • • • Case Status If the case is closed, “Case Status” will show “Closed”. If the case have been opened, “Case Opened” will show “Open”. • • • • Current CPU FAN Speed Detect CPU Fan speed status automatically . •...
  • Page 72: Hardware Monitor Setup

    6VM7-4I Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved...
  • Page 73: Ide Hdd Auto Detection

    BIOS Setup IDE HDD AUTO Detection AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Tue Jan 25, 2000 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Not Installed Pri Slave : Not Installed...
  • Page 74: Save To Cmos And Exit

    6VM7-4I Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP...
  • Page 75: Exit Without Saving

    BIOS Setup Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION Quit without saving (Y/N) ? N...
  • Page 76: Appendix

    6VM7-4I Motherboard Appendix Appendix A : VIA Chipsets Driver Installation A.VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen.
  • Page 77 Appendix 7.Click “Next”. 6.Click “Next”. 8.Click “Next”. (10) 9.Click “Finish” to restart computer.
  • Page 78 6VM7-4I Motherboard Appendix B: VIA Sound Driver A. AC’97 Audio Driver: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. Press “Audio” icon.
  • Page 79 Appendix Appendix C: BIOS Flash Procedure BIOS update procedure: If your OS is Win9X, we recommend that you used Gigabyte @BIOS Program to flash BIOS. Click “Tool” . Click “@BIOS Writer v1.05” Click “ ” . Click Here. Methods and steps : I.
  • Page 80 In method I, if the BIOS file you need cannot be found in @BIOS server, please go onto Gigabyte's web site for downloading and updating it according to method II. d. Please note that any intercorruption during updating will cause system unbooted...
  • Page 81 Format a bootable system floppy diskette by the command “ format a:/s ” in command mode. Visit the Gigabyte website at http:// www.gigabyte.com.tw ,Select the BIOS file you need and download it to your bootable floppy diskette.
  • Page 82 6VM7-4I Motherboard Appendix D: Acronyms Acronyms Meaning ACPI Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communication Riser BIOS Basic Input / Output System Central Processing Unit CMOS Complementary Metal Oxide Semiconductor CRIMM...
  • Page 83 Appendix Acronyms Meaning Original Equipment Manufacturer PCI A.G.P. Controller POST Power-On Self Test Peripheral Component Interconnect RIMM Rambus in-line Memory Module Special Circumstance Instructions SECC Single Edge Contact Cartridge SRAM Static Random Access Memory Symmetric Multi-Processing System Management Interrupt Universal Serial Bus Voltage ID...

Table of Contents