Gigabyte 6VM7-4I User Manual page 52

Hide thumbs Also See for 6VM7-4I:
Table of Contents

Advertisement

6VM7-4I Motherboard
• • • •
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
24-hour military-time clock. For example, 1 p.m. is 13:00:00.
• • • •
IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in
the computer. There are two types: auto type, and user definable type. User type is
user-definable; Auto type which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will
not work properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items.
Enter the information directly from the keyboard and press <Enter>. Such information
should be provided in the documentation form your hard disk vendor or the system
manufacturer.
CYLS.
HEADS
PRECOMP
LANDZONE
SECTORS
If a hard disk has not been installed select NONE and press <Enter>.
• • • •
Drive A type / Drive B type
The category identifies the types of floppy disk drive A or drive B that has been installed in
the computer.
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
Number of cylinders
number of heads
write precomp
Landing zone
number of sectors
No floppy drive installed
5.25 inch PC-type standard drive; 360K byte capacity.
5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch
when 3 Mode is Enabled).
3.5 inch double-sided drive; 720K byte capacity
3.5 inch double-sided drive; 1.44M byte capacity.
3.5 inch double-sided drive; 2.88M byte capacity.
45

Advertisement

Table of Contents
loading

Table of Contents