Logitech CC3000e Setup Manual page 6

Logitech PTZ Pro Camera
Use your product
Video
• Starting the video: The video is controlled
by the application and will start once
the camera is selected and the video
is started in the application. An LED will
light when the video is streaming.
• Pan and tilt the camera using
the controls on the remote control.
Press once for incremental or press
and hold for continuous pan or tilt.
Caution: Do not manually rotate webcam
head. Doing so may damage unit.
• Zoom the camera up to 10X by pressing
the zoom button.
• Home: Select the Home button to return
the default, out-of-box home position.
• Camera Presets: You can set up
to 3 Camera Preset positions.
First, position the camera using
the remote control, and then press and
hold one of the Camera Preset buttons for
3 seconds to save that position. You may
return to your defined position at any
time by pressing the Preset button once.
6 English
Use Preset 1 as your own defined
"home" position. When the camera
is reconnected to the PC, it will return to
the position set in Preset 1. If no position
is set for Preset 1, the camera will return
to the default home position.
All three Presets are by default set to
the out-of-box home.
• Far end control: By selecting this key
and downloading the application
from www.logitech.com/support/ptz,
you may control the pan, tilt and
zoom of any Logitech ConferenceCam
product or C930e Webcam in supported
applications. Camera selection and
pan, tilt and zoom tools are also
available from the downloadable
application for PC as well as ability to
disable this feature locally. Please visit
the download page listed for more
information.