Logitech CC3000e Setup Manual page 4

Logitech PTZ Pro Camera
Set up your product
1. Set up camera on table, or using
mount on table or wall.
2. Connect PTZ Pro camera
(refer to diagram above).
3. Attach cable lock before plugging
in cable to the camera port.
4. Connect to external power.
5. To start video from your PC or Mac
application, connect the USB cable
to your USB port.
4 English
a
6. The camera LED will flash to show that
connection is taking place, and when
completed, the camera head will rotate.
7. If these activities do not take
place, try again and then consult
Troubleshooting or call technical support.
8. Start your video call from
your application. The LED on the camera
will alight when streaming.
b c