[ VIII Disassembly Procedure ]
4. Thermistor (Water outlet) (Water inlet)
Exercise caution when removing heavy parts.
1. Remove the drain pan according to the procedure in sec-
tion 3.
2. Removing the Heat exchanger cover
(1) Remove the four fixing screws on the heat exchanger cov-
er (F) to remove it.
3. Removing the thermistor
(1) Remove the thermistor (G) from the thermistor holder (H)
on the copper tube.
Thermistor size
Water inlet: ø8mm
Water outlet: ø6mm
HWE1114A
Fig.6
Fig.7
- 22 -
HEX
(G), (H)
GB