[ VIII Disassembly Procedure ]
4. Thermistor (Water inlet / Water outlet temperature detection)
Be careful removing heavy parts.
1. Removing the liquid pipe and gas pipe thermistor
(1) Remove the front plate (E) with procedure [1]-3.
(2) Remove the control box (F) with procedure [1]-3.
(3) Pull out the drain pan with procedure [1]-3.
(4) Remove a fixing screw on the heat exchanger cover (G)
to remove it. (Fig.8)
(5) Remove the thermistor (H) from the thermistor holder (J)
on the copper tube. (Fig.9)
Thermistor size
Water inlet: ø8mm
Water outlet: ø6mm
HWE18170
(G)
Fig.8
Fig.9
- 25 -
(H), (J)
GB