D-Link DIR-868L User Manual page 14

Section 2 - Installation
4. Plug one end of the included Ethernet cable that came with your router into the yellow port labeled INTERNET
on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.
5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.
6. Connect the supplied power adapter into the power receptor on the back of the router and then plug it into a
power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for
the router to boot up.
7. If you are connecting to a broadband service, you may be online already and further configuration will be optional.
D-Link DIR-868L User Manual
DIR-868L
Modem
INTERNET
Computer
DIR-868L
Modem
1
INTERNET
Computer
10