Electronic Timer - Hotpoint DCH50CW Instructions For Installation And Use Manual

Electronic timer

The electronic timer displays the time and the timer function with countdown.
To set
Note: This may be set while the oven is switched off or while it is switched on.
the clock
1. Press the
start to flash.
2. Use the "+" and "-" buttons to adjust the hour value.
3. Press the
4. Use the "+" and "-" buttons to adjust the minute value.
5. Press the
Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds
have passed.
To set
Note: This function does not interrupt cooking and does not affect the oven; it is simply used to
the minute minder
activate the buzzer when the set amount of time has elapsed.
1. Press the
start to flash.
2. Use the "+" and "-" buttons to adjust the hour value.
3. Press the
4. Use the "+" and "-" buttons to adjust the minute value.
5. Press the
The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may
be stopped by pressing any of the buttons, or it will stop of its own accord after one minute).
To cancel a Press button "-" up until 0 • 00.
previous setting
button several times until the
button again so that the other two numerical digits on the DISPLAY begin to flash.
button again to confirm.
button several times until the
button again so that the other two numerical digits on the DISPLAY begin to flash.
button again to confirm.
icon and the first two numerical digits on the display
icon and the first two numerical digits on the display
2 5