HP ENVY m7 Maintenance And Service Manual page 64

12. If it is necessary to replace the webcamera/microphone perform the following: Lift the module (1) from
the adhesive holding it in place on the display bezel and disconnect the module connector (2) if you
have not already done so when removing the display cable.
If the computer is equipped with a 3D camera, lift the module (1) from the adhesive holding it in place
on the display bezel and disconnect the module connector (2) from the end of the module if you have
not already done so when removing the display cable.
13. If it is necessary to replace the WLAN antenna cable, follow these procedures:
a. Position the display back cover face up.
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts