Location And Function Of Controls; Specification - Pyramid CDRCS80 Instruction Manual

LOCATION AND FUNCTION OF CONTROLS

1

SPECIFICATION

GENERAL
Power Supply The Main Unit.................DC 13.8 Volts. Negative Ground
Current consumption..........................................................10A MAX
Maximum Output Power........................................................4 x 25W
Unit Dimension..................................181.5(W) x 155.0(D) x 103.4(H)
FM TUNER SECTION
Frequency Range...........................................87.5MHz - 108MHz(EU)
Frequency Range......................................87.5MHz - 107.9MHz(USA)
Usable Sensitivity........................................................................3uV.
I.F. Frequency.....................................................................10.7MHz
AM TUNER SECTION
Frequency Range............................................522KHz - 1620KHz(EU)
Frequency Range..........................................530KHz - 1710KHz(USA)
TAPE SECTION
Wow&Flutter............................................................................0.1%
S/N Ratio(Normal)....................................................................52dB
Separation................................................................................45dB
Frequency response.......................................................50Hz - 15KHz
CD SECTION
System.......................................................compact disc audio system.
Usable disc....................................................................compact disc.
Signal format...........................................sampling frequency 44.1KHz.
Frequency characteristics...........................................20-100Hz < 5dB
Signal to noise ratio...............................70dB [1KHz] [IEC - A net work].
Number of channels.............................................................2 STEREO.
USA EUROPE
IMPORTANT:
This radio is set to USA frequency by factory, if European
frequency is required please flip the frequency step switch on
the side of the unit.
After the switchover of the frequency switch, the frequency convert
function will not be valid until the RESET button has been pressed.
(The RESET button is in the rear facet of the front panel)
No of quantization bits 1bit.
10K-20KHz < 5dB.
10