Hook; Cutting Operation; Instant Chain Brake - Makita 5014NB Instruction Manual

Hook
When using
an
extension cord, secure
it
to the tool's cord with the hook provided.
Attach the hook about 100-200 mm (4"-
8")
from the extension cord connector.
This will help prevent unintentional dis-
connection.
I
Power cord
I
Power cord
Extension cord
Fig. 11
Cutting operation
Turn the tool on and allow the chain to reach full speed before
it
contacts the wood.
Be sure the chain i s adequately lubricated.
Use the spike as a pivot point and
ease
the
tool into the wood, rocking
it
in gently.
Do not force the guide bar in, as this may
cause overload
-
and overheating.
Fig. 1:
Instant chain brake
This tool is equipped with an instant chain brake to reduce the risk caused by kickback.
To actuate the instant chain brake, push
the protector forward.
Fig. 13
CAUTION :
As soon
as
the instant chain brake actuates, turn the tool off. Keeping the motor running
with the chain brake actuated may cause damage to the tool.
11