Sony HT-CT380 Operating Instructions Manual page 8

Tip
• Once the BLUETOOTH connection is
established, an indication
recommending which application to
download will be displayed,
according to what equipment you
have connected. Following the
instructions displayed, an application
called "SongPal," which will enable
you to operate this system, can be
downloaded. Refer to "Controlling
the system using a smartphone or
tablet device (SongPal)" (page 12).
Listening to music of the
registered device
1
Press INPUT repeatedly to display
[BT].
The BLUETOOTH indicator (blue)
flashes during attempting
BLUETOOTH pairing.
2
On the BLUETOOTH device, select
this system (HT-CT380, HT-CT381,
or HT-CT780).
3
Make sure that the BLUETOOTH
indicator (blue) lights up.
4
Start playback on the BLUETOOTH
device.
Connecting to a BLUETOOTH
device by One-touch
functions (NFC)
By holding an NFC-compatible remote
device near to the N-Mark on the
system, the system and remote device
proceed to complete pairing and the
BLUETOOTH connection automatically.
8
GB
Compatible remote devices
Remote devices with a built-in NFC
function
(OS: Android 2.3.3 or later, excluding
Android 3.x)
1
Download, install, and start the
"NFC Easy Connect" application.
Note
• The application may not be available
in some countries/regions.
2
Hold the remote device near to
the N-Mark on the system until the
remote device vibrates.
3
Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
Notes
• You can connect only one device at a
time.
• Depending on a smartphone, you may
need to set the NFC function to on
beforehand. Refer to the operating
instructions of the smartphone.