Routine Maintenance Schedule; Filling With Oil; Changing The Oil; Cold Weather Conditions - Makita MAC5200 Owner's Manual

OWNERS MANUAL

ROUTINE MAINTENANCE SCHEDULE

1) Drain water from the air tank, any moisture separators or transformers.
2) Check for any unusual noise and/or vibration.
3) Manually check all safety valves to make sure they are operating properly.
4) Inspect air filter, replace if necessary.
5) Inspect air lines and fittings for leaks; correct as necessary.
Each year of operation or if a problem is suspected:
Check condition of air compressor pump intake and exhaust valves.
Check condition of check valve. Replace if damaged or worn out.

Filling with oil:

1) Remove the oil filler plug.
2) Slowly pour the proper oil into the pump crankcase.
3) Always keep oil level in the middle of the sight glass.

Changing the oil:

Note: Every 300 hours or 3 months, whichever comes first.
1) Remove the oil drain plug. Allow oil to drain completely.
2) Replace the oil drain plug (The use of a sealing compound or Teflon tape to
avoid leakage is recommended.)
3)
Refill with the recommended oil to the proper level.
Ambient Temperatures at
Point of operation
-16°C TO 0°C (3.2°F - 32°F)
1°C TO 26°C (33.8°F - 78.8°F)
ABOVE 27°C (80.6°F)
MAKITA - MAC700 / MAC2400 / MAC5200

COLD WEATHER CONDITIONS

ROUTINE MAINTENANCE SCHEDULE
SAE
Viscosity
SAE 10W
SAE 20W
SAE 30W
ISO
Viscosity
ISO 32
ISO 68
ISO 100
13