Table of Contents
Advertisement
PROBLEM
OVEN WILL
NOT WORK
OVEN DOES NOT
COOK PROPERLY
CLOCK AND
TIMER DO NOT WORK
OVEN LIGHT DOES
NOT COME ON
SOLID DISK
ELEMENTS NOT
FUNCTIONING
PROPERLY
SURFACE UNITS
SMOKE WHILE
HEATING
COOKTOP IS HOT
ELEMENTS WILL
NOT MAINTAIN A
ROLLING BOIL
AND/OR FRYING
RATE IS NOT FAST
ENOUGH
GE Answer Center@
800.626.2000
consumer information service
26
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
. Plug on range is not completely inserted in the electrical outlet.
The circuit breaker in your house has been tripped, or a fuse has been blown.
. Oven controls not properly set.
Incorrect cookware being used. Check each cooking section for cookware tips.
Make sure the electrical plug is plugged into a live, properly grounded
power outlet.
Electrical plug must be plugged into a live power outlet.
. Some smoke and odor is normal when using solid disk elements for the fkst
time and also after using Cello Electrol@ cleaner.
Because solid disk elements heat by conduction, the cooktop may seem hotter
than you are used to. This is normal. Make sure properly fitting pans are used.
. Pans which are absolutely flat must be used. If light can be seen between the
pan bottom and straight edge, the solid disk elements will not operate properly.
Advertisement
Table of Contents
