3.
Install:
a.
stand
4.
Follow the procedures in
Removing the Back Cover
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
3.
Perform the following steps as shown in the illustration:
a. Pry the edge of the base cover [1].
b. Remove the back cover from the computer [2].
Installing the Back Cover
1.
Align and press the back cover, until it clicks into place.
2.
Install:
a.
optical-disk drive
b.
stand
3.
Follow the procedures in
Removing the Hard Drive
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
9