Table of Contents
Advertisement
Installing the System Fan
1.
Align the system fan with the heatsink such that pins of the bracket are in line with the holes of the
system fan and tighten the screws to secure it to the computer.
2.
Connect the system-fan cable to the system board.
3.
Install:
a.
system-board shield
b.
back cover
c.
optical-disk drive
d.
stand
4.
Follow the procedures in
Removing the Heatsink Assembly
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
3.
Remove the screws that secure the heatsink assembly to the system board [1,2,3,4,5,6].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
15
Advertisement
Table of Contents
