Related Manuals for Klipsch KI-102-SMA-I
Summary of Contents for Klipsch KI-102-SMA-I
- Page 1 KLIPSCH PERMANENT INSTALLATIONS KI-102-SMA-II | KI-115-SMA-II | KI-172-SMA-II | KI-215-SMA-II | KI-262-SMA-II | KI-272-SMA-II | KI-362-SMA-II | KI-396-SMA-II OWNER’S MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. The lightning flash with arrowhead symbol within an equilateral 2. KEEP these instructions. triangle, is intended to alert the user to the presence of 3. HEED all warnings. uninsulated “dangerous voltage” within the product’s enclosure that 4. - Page 3 Klipsch recommends that only qualified personnel install its loudspeaker systems. In addition to the load ratings of speaker enclosure pickup points, rigging hardware and array configurations, the safety and integrity of any installation depends on the strength and suitability of the attachment location.
-
Page 4: Installation
INSTALLATION KI-102-SMA-II | KI-172-SMA-II The optional SB-102 accessory bracket is specifically designed for the KI-102-SMA-II and KI-172-SMA-II loudspeaker systems. The bracket provides up to four attachment points to the securing surface and two attachment points to the speaker. When installing the bracket, the attachement point (2”... - Page 5 KI-262-SMA-II KI-272-SMA-II are compatible with readily available commercial rigging bars. For the KI-115-SMA-II, Klipsch recommends use of the four rear panel suspension points for face-down orientation. Internal metal brackets that distribute the load to adjacent enclosure panels back each individual mounting point.
-
Page 6: Array Configurations
ARRAY CONFIGURATIONS EASE data is available on all KI series would need to be toed-out to 90º (included Klipsch recommends that power provided to the speakers at KLIPSCH.COM/PRO. Klipsch angle), to provide the smoothest pattern and speakers not exceed the values indicated in the urges users to refer to this data when 180º... -
Page 7: Input Connections
KI-362-SMA-II VARIPOINT™ ADJUSTMENT The KI-362-SMA-II three-way loudspeaker system provides for pattern adjustment by rotating the position of the high- and mid- 10-24 UNC Screws frequency VariPoint module. To accomplish this, first determine the desired orientation of the Varipoint module. This should be established before the speaker is suspended. - Page 8 ©2015, Klipsch Group, Inc. Klipsch Group, Inc. is a wholly-owned subsidiary of Voxx International Corporation. Klipsch and Keepers of the Sound are trademarks of Klipsch Group, Inc., registered in the United States and other countries. OmniMount is a registered trademark of Ergotron, Inc.