Adjusting The Picture - Dell E207WFP Service Manual

20" LCD Color Monitor
Auto Adjust
D
E
Power Button and Indicator

3.3 Adjusting the Picture

Menu and
Icon
Submenus
Exit
Brightness/
Contrast
Use this button to activate automatic setup and adjust menu. The following
dialog appears on a black screen as the monitor self-adjusts to the current
input:
Auto Adjustment allows the monitor to self-adjust to the incoming video
signal. After using Auto Adjustment, you can further tune your monitor by
using the Pixel Clock (Coarse) and Phase (Fine) controls under Image
Settings.
NOTE: Auto Adjust will not occur if you press the button while
there are no active video input signals, or attached cables.
Use the power button to turn the monitor on and off.
The green light indicates the monitor is on and fully functional. An amber
light indicates power save mode.
Description
Select to exit the Main menu.
Brightness adjusts the luminance of the backlight.
Adjust Brightness first, then adjust Contrast only if further adjustment is
necessary.
Push the + button to increase luminance and push the - button to decrease
luminance (min 0 ~ max 100).
Contrast adjusts the degree of difference between darkness and lightness on the
monitor screen.
Push the + button to increase the contrast and push the - button to decrease the
contrast (min 0 ~ max 100).
8
Dell E207WFP
Auto Adjust In Progress