Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft a n d Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices,
Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Page 1
ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Back to Contents Page About Your Monitor Dell™ E2011H Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product and Safety Information Guide Product Features The Dell™ E2011H flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ 50.8 cm (20-inch) viewable area display (Measured diagonally). 1600 X 900 resolution, plus full-screen support for lower resolutions.
Dell Soundbar mounting brackets Attaches the optional Dell Soundbar. Barcode serial number label Refer to this label if you need to contact Dell for technical support. Cable management slot Use to organize cables by placing them through the slot. Side View...
To disable the stand release button and lock the stand assembly using an M3 machine screw. Monitor Specifications Flat Panel Specifications Model E2011H Screen type Active matrix - TFT LCD Panel type Screen dimensions 50.8 cm (20-inches viewable image size) Preset display area 462.8 (H) x 272.0 (V) mm...
Color gamut (Typical) 79%* (CIE1976) *[E2011H] color gamut (typical) is based on CIE1976 (79%) and CIE1931 (68%) test standards. Resolution Specifications Model E2011H Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz (automatic) Maximum resolution 1600 X 900 at 60 Hz...
Weight without stand assembly (For wall mount or VESA mount 2.90 kg (6.38 lb) considerations - no cables) Weight of stand assembly 1.11 kg (2.45 lb) Environmental Characteristics Model E2011H Temperature Operating 0° to 40 ° C Storage: -20° to 60°C (-4° to 140°F) Non-operating Shipping: -20° to 60°C (-4° to 140°F) Humidity Operating...
Pin Assignments VGA Connector 15-pin Side of the Connected Signal Number Cable Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B Computer 5V/3.3V GND-sync DDC data H-sync V-sync DDC clock DVI Connector 24-pin Side of the Connected Signal Number Cable TMDS RX2- TMDS RX2+ TMDS Ground Floating Floating...
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
Page 11
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps:- ® ® 1. Check Operating System Requirements Windows XP, Windows Vista , Windows 2. Install Entech API Install 3. Install PowerNap Software Install Back to Contents Page...
Back to Contents Page Setting Up Your Monitor Dell™ E2011H Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1600 X 900 again. NOTE: If you are unable to set the resolution to 1600 x 900, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions. Back to Contents Page...
Back to Contents Page Setting Up Your Monitor Dell™ E2011H Monitor If you have non Dell™ desktop, portable computer, or graphic card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
Using the On-Screen Display (OSD) Menu PowerNap Software Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
save mode. Power (with power light indicator) Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. Press the MENU button to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input Main Menu for Digital (DVI-D) Input NOTE:...
Page 16
Contrast Use this menu to activate Brightness/Contrast adjustment. Brightness Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100). NOTE:Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated.
Page 20
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen. AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use ...
Page 21
INPUT SOURCE Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. Auto Select Select Auto Select to scan for available input signals. Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source.
Page 22
When you select Video, you can choose Movie, Game, Sports, or Nature: Movie: Loads color settings ideal for movies. This is the default preset mode. Game: Loads color settings ideal for games. Sports: Loads color settings ideal for sports. Nature: Loads color settings ideal for nature.
Page 23
Wide Mode Adjust the image ratio as 4:3 or full screen. Horizontal Position Use the buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). NOTE: When using a DVI source, the Horizontal Position setting is not available. Vertical Position Use the buttons to adjust image up and down.
Page 24
Back to Contents Page Setting Up Your Monitor Dell™ E2011H Monitor Setting the display resolution to 1600 X 900 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 X 900 pixels by performing the...
Page 25
ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Back to Contents Page Setting Up the Monitor Dell™ E2011H Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached from monitor when it is shipped from the factory.
Attaching the Soundbar (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. To attach the Soundbar: Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. Slide the Soundbar to the left until it snaps into place.
Removing the Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface. This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up NOTE: instructions.
Troubleshooting Dell™ E2011H Monitor User's Guide Troubleshooting Your Monitor Built-in Diagnostics Common Problems Product Specific Problems Dell Soundbar Problems CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions Troubleshooting Your Monitor Self-Test Feature Check Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1.
LCD screen has spots Cycle power on-off. Pixel that is permanently off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com. Stuck-on Pixels LCD screen has bright spots Cycle power on-off.
Run the built-in diagnostics. NOTE: When choosing DVI-D mode, the Auto Adjust function will not be available. Dell™ Soundbar Problems Common Symptoms What You Experience Possible Solutions No Sound No power to Soundbar - the Turn the Power/Volume knob on the Soundbar clockwise to the middle position;...