Advertisement
Pre-Amp / Power Amp combination:
Connection between PRE-AMP and POWER AMP
Vorstufe (Pre Amp.)
out
Endstufe (Power Amp
)
in
Adjustment of the active low frequency rectification:
PASSIVE CONTROL offers an adjustment band width from 0 dB to +12 dB. The
adjustments are continuous (without steps) governed by the prevailing room acoustics,
the type and character of a given recording and the individual listening preference.
In the position 0 dB, PASSIVE CONTROL is not actively working! In this position the
actual lower frequencies of the passive signal will be reproduced unmodified by the
AURA speakers.
PASSIVE CONTROL offers a choice between "Full Range" and "Sat + Woofer" mode
(switch).
"Full Range" operation:
When the AURA speakers are not used in combination with a subwoofer then the "Full
Range" operation is to be chosen. In this mode the AURA is reproducing the entire
signal band width, also the lower frequencies.
"
Sat + Woofer" operation:
T
his is the right choice when the AURA is operated together with a subwoofer (e.g.
W
LM DUO). In this mode the signal frequencies are split; the frequencies below 80 Hz
are directed to the subwoofer. In conjunction with the WLM
device BASS CONTROL
and an active WLM DUO subwoofer a perfect frequency split can thus be obtained.
MANUAL WLM AURA
6/11
Advertisement
