Page 1
"passive" mode (directly connected to your amplifier). Passive / Active Switching Device (optional) With this option the AURA can at any time and easily be up-graded to a fully "active" speaker system. Via the switching device the signal path will by-pass the built-in filter located in the rear terminal.
Page 2
In the fully active mode the external WLM filter "SYSTEM CONTROL" is to be employed. Due to the risk of damage, never operate the AURA in the active mode without an external filter system! Standard Passive- / Active-Switching Device...
Page 3
1.0 m, preferably more. The distance to the side wall should be considerably less than that (>0.25 m). Thanks to the WLM PAC-Technology (m ore about this below) the clearly noticeable sound stage will built up between the speakers, quite similar to a large blister.
Page 4
By means of the "TWEETER CONTROL" (built in the terminal of each speaker as standard), the upper frequencies of the AURA can be adjusted to the prevailing room acoustics and according to the individual listening preference. 5.2 Partly active operation mode with WLM "PASSIVE CONTROL“ (optional) The very useful WLM device PASSIVE CONTROL will enable you to operate the passive AURA speakers in a partly active mode.
Page 5
Note: When using the PASSIVE CONTROL module with the AURA speakers, choose the position "PASSIV" of the Passiv-/Aktiv- switch at the speaker terminal. Different connections of PASSIVE CONTROL Integrated Amp: Connection to TAPE IN and TAPE MONITOR OUT of the amp...
Page 6
(switch). "Full Range“ operation: When the AURA speakers are not used in combination with a subwoofer then the "Full Range“ operation is to be chosen. In this mode the AURA is reproducing the entire signal band width, also the lower frequencies.
Page 7
Pre-Amp / Power A mp combination: Connection between PRE-AMP and POWE R AMP Vorstufe (Pre Amp.) Passive Control Bass Control R in L R in L Endstufe (Power Amp Lyra G.V.) Endstufe (Power Amp, Bass Duo) MANUAL WLM AURA 7/11...
Page 8
WLM speakers excel in this respect, since they offer an exceptional and unusual efficiency of 98 dB (1W, 1m).
Page 9
The WLM listener is able to hear a dis tinctly structured sound stage image. No longer is he limited and fixed to a narrowing 2- channel reproduction of his speakers.
Page 10
WLM-Dealer). ondition for the warranty service is that the products are operated in accordance with is manual. uring the warranty period WLM will replace or repair the defect parts free of charge to e customer. ondition is however: •...
Page 11
Please a sk your dealer to fill in this form at the time of the purchase. This registration will entitle you to call on WLM for technical support and it a prerequisite for an eventual warranty claim against WLM. WLM Loudspeakers...