Advertisement
Note:
The toggle-switches of the Passive / Active Switching Device are secured to
avoid the risk of damage through an inadvertent operation (e.g. when the external filter
has not been installed). Pull the switch out of its notched-in rest position before you can
actually operate it.
In the fully active mode the external WLM filter "SYSTEM CONTROL" is to be
employed.
Due to the risk of damage, never operate the AURA in the active mode without an
external filter system!
Standard
Passive- / Active-Switching Device
(optional)
The solid WBT connector terminals for bi-wiring accept all known loudspeaker cable
ends: bare cables, banana or forked cable shoes.
It is up to your personal preference whether you want to operate your speakers with or
without its front covers. They have little or no effect on the quality of the sound
reproduction.
Please keep in mind that the speakers have a bass reflex opening in the cabinet.
It is vital that the sound waves coming from this aperture should "radiate" freely
to all sides.
MANUAL WLM AURA
2/11
Advertisement
