Connecting Your Component With No Hdmi Terminal - Pioneer VSX-531 Operating Instructions Manual

2
2
Connecting your component with no HDMI
terminal
This diagram shows connections of a TV and Blu-ray Disc/DVD
player (or other playback component) with no HDMI terminal to
the receiver.
Important
• When the receiver and TV are connected by composite
cable, the OSD function allowing display of the receiver's
settings, operations, etc., on the TV's screen cannot be
used. In this case, watch the receiver's front panel display
while performing the various operations and making
settings.
Note
• You can only connect one component to the optical input
terminal. If connecting other devices, please use a
different method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable,
first, switch to the BD/DVD (Blu-ray Disc/DVD player) or
AUDIO SEL
CBL/SAT (set-top box), then press
the audio signal O1 (OPTICAL1) (see
input signal on page 16).
• You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a
different method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the BD/DVD (Blu-ray Disc/DVD player or CBL/
AUDIO SEL
SAT (set-top box), then press
audio signal C1 (COAXIAL1) (see Selecting the audio input
signal on page 16).
VIDEO OUT
ANALOG AUDIO OUT
R
to choose
Selecting the audio
to choose the
Blu-ray Disc/DVD player
Select one
VIDEO OUT
DIGITAL AUDIO OUT
L OPTICAL COAXIAL
OSD cannot be output.
VIDEO IN
13
Connecting your equipment
Set-top box
Select one
ANALOG AUDIO OUT DIGITAL AUDIO OUT
R L OPTICAL COAXIAL
R L
ANALOG AUDIO OUT
Select one
TV
2
4
31
This connection is
required in order
to listen to the
sound of the TV
over the receiver.
OPTICAL
DIGITAL AUDIO OUT