HCL MiLeap M06 User Manual page 25

User's Guide
3. Plug one end of the monitors power cord into the power socket on the monitor and the other end to an
electrical outlet.
4. To use the monitor, turn on the monitor before turning on the computer.
5. The monitor should respond by default. If not, you can switch the display to the monitor or to both
(simultaneous display), or to multi-display by pressing the Fn+F4 functional key. In Windows, you can also
change the display through the settings in Display Properties.
6. You can change display settings through your operating system. See your operating system documentation
or online help for specific information.
Caution:
Do not disconnect the external monitor while the computer is in the Standby mode or Hibernation mode. If no external monitor is
connected when the computer resumes, the LCD might not display properly.
Note:
Make sure that the VGA driver is installed correctly.
Note:
Simultaneously display of movie files on the LCD and on the external monitor is not possible due to chipset limitation.
Using the Notebook PC
4-5