Table of Contents
Advertisement
User's Guide
Powering ON the Notebook PC
Use power button to turn ON the PC. If you need to run the BIOS Setup to set or modify the system
configuration, press (Del) upon boot up to enter the BIOS Setup. To view post screen press Tab key during
logo screen and press Esc to go to bootable devices.
To stop in this mode
Off
Standby
Hibernation
If you choose to stop in Standby or Hibernation mode, you can return to where you left off the next time
you start up the computer.
Do this
Follow the shutdown procedure of your
operating system. This can prevent loss of
unsaved data or damage to your software
programs.
If the system is locked up because of
hardware or software problems, press the
power button to turn off the computer.
Depending on your settings in Windows,
you can put the computer in Standby
mode by:
Closing the display cover
Pressing the Fn+Esc function key
Pressing the power button
Depending on your settings in Windows,
you can put the computer in
Hibernation mode by:
Closing the display cover
Pressing the Fn+Esc function key
Pressing the power button
Getting Started
To start up or resume again
Press the power
button.
Press any key or Press
power button.
Press the power
button.
3-4
Advertisement
Table of Contents
