Setting Up Your Dns Name Service - FreeHand MusicPad Pro+ User Manual

5
It is probably best to have the IP address be obtained automatically. The exception
may be if you are using Ad-hoc Mode. If other systems in the ad-hoc network
specify an IP address you should also specify an IP address, a netmask and a
default gateway appropriate for that ad-hoc network.
6
If you are using a wireless router, specify Infrastructure Mode. If you are
connecting directly to another computer running a wireless device, specify Ad-hoc
Mode and the appropriate Ad-hoc Channel.
7
In general it is a bad idea to scan for the SSID since there could be multiple
wireless network in your vicinity and you might get the wrong one. You usually want
to set the Scan for SSID? drop down box to no and enter the SSID of your network.
You can see the list of network SSIDs currently available in the Available Networks
section of the dialog. If the network you are looking for does not appear here be
sure it is turned on and tap the Refresh button.
8
Wireless security is not currently supported so you will have to have an
unencrypted network to communicate.

Setting Up Your DNS Name Service

If you are using either Ethernet networking or 802.11b wireless networking you will
probably need to set up a DNS server. The MuiscPad Pro tablet comes preconfigured
with some DNS servers that may work, but it is likely that you will want to change the
configuration to improve the DNS performance.
To configure the DNS Service:
1
On the main toolbar tap the Tools icon.
2
Tap MusicPad Options...
3
Tap the Networking button.
MusicPad User's Guide, Software Version 4.1
•
•
•
117
•
•
•