Installing Musicpad Manager - FreeHand MusicPad Pro+ User Manual

Installing MusicPad Manager

1
•
•
•
2 Chapter 1: Getting Started
•
•
•
•
Touch screen
•
Stylus
•
Power pack
•
Software installation CD (including user's guide and release notes)
•
External USB flash drive (memory stick)
•
Internal rechargeable battery
•
32-MB internal flash memory
The following I/O connections are standard on the MusicPad Pro Plus tablet:
•
One 12VDC jack to connect to a supplied external AC to DC converter.
•
Two USB ports. One is a host port to connect to your computer or peripheral
devices (such as a Flash memory device). The other is a device port for direct
USB-to-USB connection between your PC or Macintosh and the MusicPad Pro
tablet. The USB ports support standard plug-and-play and hot swapping, so the
MusicPad Pro usually recognizes the device to which it is connected.
•
One USB cable.
•
One DB15 standard video port to connect the MusicPad Pro tablet to a monitor
for ease of viewing or for larger display to an audience (landscape mode only).
•
One mini DIN (stereo) jack for use with an accessory foot pedal for mechanical
page turning.
•
One mini DIN (stereo) jack for use with a set of headphones or (self-powered)
computer speakers for hearing audio produced by the MusicPad Pro tablet.
The following accessories are available separately for the MusicPad Pro Plus tablet:
•
Foot pedal page-turner.
•
USB flash drive
•
Carrying case
•
Music stand
•
USB 802.11b Wireless network adapter
The MusicPad Manager lets you download music, manage your files, move files to and
from the MusicPad, and annotate scores. This section describes how to install
MusicPad Manager. To find out more about using the MusicPad and the MusicPad
Manager, turn to the next chapter.
To install MusicPad Manager on a Windows System
Insert the FreeHand Installation CD into the CD-ROM drive on your computer. The
installation starts up automatically. If it does not, select Start->Run... and type
"d:\autorun.exe". (d: is the drive letter of your computer's CD-ROM.)