Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK A514 Operating Manual

Attaching the cover

► Place the cover into position, following the direction of the arrow (1).
The screws of the memory cover and the hard disk cover are different lengths.
When installing the cover, you must use the correct screws.
If you install the wrong screws, components may be damaged.
► Secure the cover with the screws (2).

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu
Removing and installing components during servicing
2
2
2
2
2
1
"Inserting battery", Page
2
2
2
31).
53