Download Print this page

CAC / BDP KSACN0101CAC Owner's Manual page 4

Wired remote controller ductless split systems

Advertisement

WIRED CONTROLLER BUTTONS NAMES AND OPERATIONS
1. MODE BUTTON
Press this button to change the operation mode in the following
sequence: AUTO, COOL DRY, HEAT, FAN, and back to AUTO.
Remark: The COOLING ONLY model does not have a HEAT
mode.
2. TIMER ON BUTTON
Press this button to activate the TIMER ON function. With every
press, the time increases 0.5h. After 10h, the time increases in 1h
increments. To cancel, set to "0.0".
3. TIMER OFF BUTTON
Press this button to activate the TIMER OFF function. With every
press, the time increases 0.5h. After 10h, the time increases in 1h
increments. To cancel, set to "0.0".
4. FOLLOW ME BUTTON/I- FEEL BUTTON
When in the COOL, HEAT or AUTO mode, press this button to
activate the FOLLOW ME function. Press again to deactivate.
5. ELECTRICAL HEATER BUTTON/HEATER BUTTON
Press this button in the HEAT mode to deactivate the electrical
heater function.
6. RESET BUTTON (hidden)
Use a .039 inch (1mm) stick and place in the hole to cancel the
current setting. The wire controller should revert to its original
setting.
7. ON/OFF BUTTON
When the unit is off, press this button and the indicator displays,
the wire controller powers on and sends the setting information to
the indoor PCB. When on, press this button, the indicator turns
off and sends the instruction. If the TIMER ON or TIMER OFF
function has been set, it cancels the setting and sends instructions
to power off the unit.
8. ADJUST BUTTON
Y
Press and hold the button and the temperature increases 2F (1C)
every 0.5 second.
9. ADJUST BUTTON
B
Press and hold the button and the temperature decreases 2F (1C)
every 0.5 second.
10. SWING BUTTON
Press the START SWING button to start the function and the
button again to stop.
11. ECONOMY OPERATION BUTTON / SLEEP BUTTON
Press this button to operate the indoor unit in the ECONOMY
mode. Press this button again to exit this mode (this button may
be ineffective for some models).
12. FAN SPEED BUTTON
Press this button consecutively and the fan speed will cycle in the
following direction: AUTO, LOW, MEDIUM, HIGH.
4

Advertisement

loading

This manual is also suitable for:

Ksacn0101aaa