System Panel Connector - Asus B85M-K PLUS User Manual

9. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
B85M-K PLUS System panel connector
• System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
10. USB 3.0 connector (20-1 pin USB3_910)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency and backward compatibility with
USB 2.0.
B85M-K PLUS USB3.0 Front panel connector
ASUS B85M-K PLUS
E10185_B85M-K_PLUS_Guide.indb 19
F_PANEL
+PWR_LED-
PIN 1
B85M-K PLUS
+HDD_LED-
USB3_910
PIN 1
B85M-K PLUS
PWR_BTN
RESET
1-19
2015/2/13 14:25:15