Activities – Ultimate Rc Speedway; Pit Stop; Elevator - VTech Go!Go! Smart Wheels User Manual

ACTIVITIES –ULTIMATE RC SPEEDWAY

1. PIT STOP

While the RC SmartPoint
is in REMOTE CONTROL MODE,
hold the FORWARD BUTTON
when going through the pit stop and
watch as the race car stops and
triggers the gears to spin. The RC
SmartPoint
to the SmartPoint
The LIGHT-UP DRIVER BUTTON
will flash with the sounds.

2. ELEVATOR

With the elevator track piece at the
base of the elevator, drive the RC
SmartPoint
CONTROL MODE onto the elevator
track piece. Continue to hold the
FORWARD BUTTON, and the RC
race car will trigger the elevator to
rise. The RC SmartPoint
also responds to the SmartPoint
the elevator. The LIGHT-UP DRIVER
BUTTON will flash with the sounds.
Note: If the elevator does not return to
its original position, reset the elevator
by flipping the trigger switch on the
landing platform of the upper level of
the elevator as shown in the photo.
This will return the elevator to its
original position.
®
Racer also responds
®
on the pit stop.
®
Racer in REMOTE
®
®
Racer
Racer
on
®
TM
20