Table of Contents
Advertisement
Downrod (continued)
Lower the adapter cover over
the downrod until it rests flush
against the motor housing. Align
the screw holes on the adapter
cover with the screw holes on
the motor housing and install the
three adapter cover screws found
in the
hardware bag.
Note: The adapter cover is not
used for low-profile mounting.
Put the wires and downrod
through the canopy. Let the
canopy sit loosely on top of
the fan.
M8511-01 • 10/30/14 • © Casablanca Fan Company
DO NOT PICK THE FAN UP BY
THE CANOPY OR WIRES. Place
the downrod ball into the slot
in the ceiling bracket.
8
www.CasablancaFanCo.com
1.888.227.2178
Advertisement
Table of Contents
